ayuda con w300 no power

[ergoflo13]

v0.914036/UNI
CARD SERIAL:
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
FLASH CID:49 COLOR:RED

Model:W300i
MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123203
Default version: R9A036
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed: 6 secs.
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 168 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
Send subblock NAK
Elapsed: 94 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
FLID fail
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 9 secs.

v0.914036/UNI
CARD SERIAL:
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
FLASH CID:49 COLOR:RED

Model:W300i
MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
MAPP CXC version: R9A036
Language Package:AMERICA_2
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1123203
Default version: R9A036
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed: 6 secs.
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 168 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
Send subblock NAK
Elapsed: 94 secs.