Resultados 1 al 7 de 7
  1. 27/07/2009 12:44:15 #1
    ergoflo13
    ergoflo13 no está en línea
    Top Android
    Fecha de ingreso
    21/dic/2006
    Móvil
    -
    Mensajes
    49

    ayuda con w300 no power

    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 6 secs.
    Reply With QuoteRESPONDER
  2. 27/07/2009 12:58:58 #2
    ergoflo13
    ergoflo13 no está en línea
    Top Android
    Fecha de ingreso
    21/dic/2006
    Móvil
    -
    Mensajes
    49

    Respuesta: ayuda con w300 no power

    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 6 secs.
    Open COM port OK
    phone pre-boot failed,possible RECOVERY needed.
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 168 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    Send subblock NAK
    Elapsed: 94 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    FLID fail
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed: 5 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    loader header not accepted
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed: 9 secs.

    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 6 secs.
    Open COM port OK
    phone pre-boot failed,possible RECOVERY needed.
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 168 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    Send subblock NAK
    Elapsed: 94 secs.
    Última edición por Elitek550; 27/07/2009 a las 14:17:34 Razón: Mensajes consecutivos
    Reply With QuoteRESPONDER
  3. 27/07/2009 13:04:15 #3
    MasterK850
    MasterK850 no está en línea
    Gold Avatar de MasterK850
    Fecha de ingreso
    31/jul/2008
    Ubicación
    ¡¡¡¡¡mExIcO!!!!!
    Móvil
    GalaxyMini K850
    Mensajes
    1.172

    Respuesta: ayuda con w300 no power

    Hola checa que tengas la pila bien cargada y de que estas ingresando archivos correctos OK
    Reply With QuoteRESPONDER
  4. 27/07/2009 18:58:48 #4
    ergoflo13
    ergoflo13 no está en línea
    Top Android
    Fecha de ingreso
    21/dic/2006
    Móvil
    -
    Mensajes
    49

    Respuesta: ayuda con w300 no power

    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 6 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\r9a036_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "44273153"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 516 secs.
    -------------------------------------------------------------



    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 6 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\R9A036_1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a036 cid 49\r9a036_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "44273153"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 516 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "75887381"
    Signing...
    control keys complete.
    full sig complete.
    Unlock DONE
    Elapsed: 59 secs.
    ----------------------------------------------

    probando con otra flash
    v0.914036/UNI
    CARD SERIAL:
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 7 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_CXC1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "10255620"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 527 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 5 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A035_CXC1123260_GENERIC_JE
    Restore from:R9A035_CXC1123260_GENERIC_JE
    can't open file "D:\boxes\setool\update\29.36\rest\R9A035_CXC1 1232 60_GENERIC_JE"
    Setting up GDFS...
    no ack during gdfs_readvar !
    Can't read CRITICAL data
    Unlock FAILED
    Elapsed: 115 secs.
    v0.914036/UNI
    CARD SERIAL: 00032227
    Loaded 51 flash descriptors
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 7 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A036_CXC1123260_GENERIC_JE
    Restore from:R9A036_CXC1123260_GENERIC_JE
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_CXC1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "10255620"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 527 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 5 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A035_CXC1123260_GENERIC_JE
    Restore from:R9A035_CXC1123260_GENERIC_JE
    can't open file "D:\boxes\setool\update\29.36\rest\R9A035_CXC11232 60_GENERIC_JE"
    Setting up GDFS...
    no ack during gdfs_readvar !
    Can't read CRITICAL data
    Unlock FAILED
    Elapsed: 115 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A035_CXC1123260_GENERIC_JE
    Restore from:R9A035_CXC1123260_GENERIC_JE
    can't open file "D:\boxes\setool\update\29.36\rest\R9A035_CXC11232 60_GENERIC_JE"
    Setting up GDFS...
    no ack during gdfs_readvar !
    Can't read CRITICAL data
    Unlock FAILED
    Elapsed: 100 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 2 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A035_CXC1123260_GENERIC_JE
    Restore from:R9A035_CXC1123260_GENERIC_JE
    can't open file "D:\boxes\setool\update\29.36\rest\R9A035_CXC11232 60_GENERIC_JE"
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_CXC1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "67635210"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 494 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 2 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 5 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 5 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Open COM port OK

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R9A035_CXC1123260_GENERIC_JE
    Restore from:R9A035_CXC1123260_GENERIC_JE
    can't open file "D:\boxes\setool\update\29.36\rest\R9A035_CXC11232 60_GENERIC_JE"
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_CXC1123260_GENERIC_JE.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:336
    Will flash 336 blocks...
    SSW loading returns:0
    writing D:\boxes\setool\flashes\w300 r9a035\r9a035_america2_fs.ssw.cry
    CURRENT FLASH FILE CID:49
    SSW uses dynamic hash, dynamic hash len is:157
    Will flash 157 blocks...
    SSW loading returns:0
    Setting up GDFS...
    Writing simlocks...
    ALL UNLOCK/LOCK CODES SET TO "18045503"
    Signing...
    control keys complete.
    full sig complete.
    LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed: 500 secs.
    Open COM port OK
    ChipID:8040,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35424401493590 CERT:RED
    FLASH CID:49 COLOR:RED

    Model:W300i
    MAPP CXC article: R9A036 prgCXC1123260_GENERIC_JE
    MAPP CXC version: R9A036
    Language Package:AMERICA_2
    CDA article: CDA102295/1
    CDA version: R2A
    Default article: cxc1123203
    Default version: R9A036
    PROVIDER: 000-00
    SIMLOCKS NOT DETECTED

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed: 3 secs.

    no grava la nueva flash
    R9A035_CXC11232 60_GENERIC_JE"
    porke????????????????

    ayuda please
    Última edición por Elitek550; 27/07/2009 a las 20:08:56 Razón: Mensajes consecutivos
    Reply With QuoteRESPONDER
  5. 27/07/2009 19:11:57 #5
    elite-star
    elite-star no está en línea
    Gold Avatar de elite-star
    Fecha de ingreso
    05/sep/2008
    Ubicación
    Izcalli
    Móvil
    x10a
    Mensajes
    1.484

    Respuesta: ayuda con w300 no power

    HOLA

    despues de cargar flash debes encender el equipo para que haga el check con el firmware nuevo de lo contrario no lo hara y marcara el firmware anterior

    SALUDOS
    Reply With QuoteRESPONDER
  6. 06/08/2009 18:28:27 #6
    gilber966
    gilber966 no está en línea
    Recién Iniciado Avatar de gilber966
    Fecha de ingreso
    06/ago/2009
    Móvil
    -
    Mensajes
    2

    Respuesta: ayuda con w300 no power

    Cita Iniciado por elite-star Ver mensaje
    HOLA

    despues de cargar flash debes encender el equipo para que haga el check con el firmware nuevo de lo contrario no lo hara y marcara el firmware anterior

    SALUDOS


    a mi me dice "file retoration not present" y no se que hacer alguien me puede ayudar
    Reply With QuoteRESPONDER
  7. 06/08/2009 21:11:45 #7
    elite-star
    elite-star no está en línea
    Gold Avatar de elite-star
    Fecha de ingreso
    05/sep/2008
    Ubicación
    Izcalli
    Móvil
    x10a
    Mensajes
    1.484

    Respuesta: ayuda con w300 no power

    HOLA

    RESTORATION FILE NO PRESENT depende que es lo que le quieras hacer al equipo...si quieres liberar necesitas el REST pero si quieres flashear no es necesario...

    Como saco el RESTORE FILE?
    facil
    metes el MAIN (correspondiente) en ADD y das identify
    y en automatico lo crea
    SALUDOS
    Reply With QuoteRESPONDER
« W760i nose deja flashar... | Como flashear S302 a Español »

Información de tema

Usuarios viendo este tema

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

Temas similares

  1. [Ayuda] error con Power notification widget
    Por GothicWave en el foro Modificaciones Android
    Respuestas: 0
    Último mensaje: 14/07/2012, 00:38:35
  2. Power
    Por EliteDrOiD en el foro Temas Symbian 5ª Edición
    Respuestas: 0
    Último mensaje: 23/01/2011, 20:37:39
  3. Ayuda con acoustics Extreme Stereo Power!!!
    Por Strella en el foro Camdrivers - Dispdrivers - Acoustic Drivers
    Respuestas: 4
    Último mensaje: 09/09/2009, 04:15:21
  4. no power
    Por ergoflo13 en el foro Se Tool Box / Dongle
    Respuestas: 5
    Último mensaje: 24/07/2009, 22:42:36
  5. [ELF] POWER MOD
    Por cachok9999 en el foro Solo Elfs y Actualizaciones
    Respuestas: 1
    Último mensaje: 28/09/2008, 17:49:09

Etiquetas para este tema

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •  

Reglas del foro