Error al flashear w300

[[jls]]

lo intente flashear un full flash y me salio este error

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

CDA:CDA102499/87
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901144419 CERT:RED
ldr_on_ldr hdr no ack,err:10
mempatcher fails to load
Elapsed:8 secs.

[tuzos_man]

lo intente flashear un full flash y me salio este error

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !

CDA:CDA102499/87
MODEL:W300i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901144419 CERT:RED
ldr_on_ldr hdr no ack,err:10
mempatcher fails to load
Elapsed:8 secs.

Mi estimado:

intenta flashear el telefono con las teclas 2 y 5 juntas y no las sueltes hasta donde termine el proceso.... ademas por la leyenda de mempatcher fails to read, puede que el problema este en tu chip de memoria.... pero bueno, intenta lo primero..

Un saludo!