[RESUELTO] k790 se apaga al cambiar imei

[MacMOon]

Hola que tal bueno, aqui tengo un k790 - que al Liberar i Cambiar IMEI. Se me Apaga siempre (luego del executor)
Si alguien sabe por que o como Liberar i Cambiar IMEI a este modelo.
Gracias.


Identify:

Elapsed: 17 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35220801471777 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K790a
Brand:Generic
MAPP CXC article: R8BF003 prgCXC1250477_GENERIC_EV
MAPP CXC version: R8BF003
Language Package:AMERICA_2
CDA article: CDA102568/1
CDA version: R2A
Default article: cxc1250491
Default version: R8BF003
PROVIDER: 000-00
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 8 secs.

THAT ACTION IS ILLEGAL,IF YOU DOING IT
FOR ANY PURPOSE, OTHER THAN REPAIR PHONE

Liberando i Cambiando IMEI

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35220801471777 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM249
PHONE READY TO PROCEED
EXECUTOR STARTED

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed: 214 secs.



Gracias por su ayuda.

[Ivan08v]

Flashea el equipo y repite el proceso de liberacion

[MacMOon]

ya lo flashe lo cambie a R8BF003.
i luego solo flasheaba GENERIC_R8BF003 para prenderlo.
alguna otra cosa que pueda hacer?

Gracoas-aaa2

[Ivan08v]

Estas conectando en modo bootrom y no con C

Saludos