aaa1Recientemente me trajeron un w810 movistar (México) y tiene la falla de que parpadea una pantalla blanca, en un principio crei que con un full flash quedaria pero sigue haciendo lo mismo.

Utilizando el programa PhoneXS 2.10 alpha 6 me sale el siguiente log:
14:08:46| Phone-XS GUI Build V2.10 Alpha Ready!
14:08:46| System Diagnostics check: OK!
14:09:21| Attempting to open the interface...
14:09:21| ++++++++++++++++++++++++++++++++++
14:09:21| Turn off phone
14:09:21| Hold C Button on phone and connect phone.
14:09:21| You have 30 seconds.
14:09:21| ++++++++++++++++++++++++++++++++++
14:10:24| Error: Cannot open phone communication port
14:10:25| Sorry, brown phones are NOT SUPPORTED
14:10:25| +++ Sendinging shutdown signal to phone...
14:10:27| Shutting down...
18:20:40| Phone-XS GUI Build V2.10 Alpha Ready!
18:20:40| System Diagnostics check: OK!
18:20:52| Attempting to open the interface...
18:20:52| ++++++++++++++++++++++++++++++++++
18:20:52| Turn off phone
18:20:52| Hold C Button on phone and connect phone.
18:20:52| You have 30 seconds.
18:20:52| ++++++++++++++++++++++++++++++++++
18:21:17| Sorry, brown phones are NOT SUPPORTED
18:21:17| +++ Sendinging shutdown signal to phone...
18:21:19| Shutting down...
18:21:21| Phone-XS GUI Build V2.10 Alpha Ready!
18:21:21| System Diagnostics check: OK!
18:21:28| Attempting to open the interface...
18:21:28| ++++++++++++++++++++++++++++++++++
18:21:28| Turn off phone
18:21:28| Hold C Button on phone and connect phone.
18:21:28| You have 30 seconds.
18:21:28| ++++++++++++++++++++++++++++++++++
18:21:32| PORT STATUS: ACTIVE
18:21:32| DBID: 8040 (db2010 Marita compact)
18:21:32| proto: 3.1
18:21:32| sending loaders\db2010_cid00_prodid_p3k.bin
18:21:32| QH00 Header
18:21:32| Wait for EsB
18:21:32| Wait for EhM
18:21:32| QA00 Prologue 6532 bytes
18:21:32| Wait for EaTEbS
18:21:32| QD00 Payload 35540 bytes
18:21:32| Wait for EdQ
18:21:32| This is a PRODUCTION_ID loader
18:21:32| Activating GDFS...

Despues use el programa XS 3.1 y los siguientes archivos:
- W810i_CDA102494_64_R7A_Telefonica_Mexico
- W810_R4EA031_MAIN_GENERIC_HN_RED49
- W810_R4ED001_FS_AMERICA_2_RED49

y realice de nuevo el full flash pero sigue estando igual el celular.

¿De que otra forma se puede solucionar?

PD. Gracias por Tomarte la Molestia de Leer mi Mensaje !!!.aa13