[RESUELTO] W300i muerto al subir camdriver

[†Riv†]

Pues veran! Ya me cree el rest y ya esta en la carpeta que corresponde pero intente flashear el main y nada me sigue dando ese error casi al final pero ahora me salio en distinto block!

Ojala que haya forma de arreglarlo!!


Edito:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1123260_GENERIC_JE
Restore from:R4EA031_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\¡M&J!\Escritorio\firmware r4ea031\W300\W300_R4EA031_MAIN_GENERIC_JE_RED49.mb n
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:336
Will flash 336 blocks...
verify block error
last blk:45260000,00010000
Elapsed:601 secs.

Esto es lo que me salio!!