[RESUELTO] Liberacion fallida.

[karove]

mejor posteanos el log:

[TUTORIAL] ¿Cómo postear el LOG de Identify? - Top Sony

Hola Dj_RuLaZ.
Tal como me indicas te posteo el log de identify. Me ha costado mas de 30 intentos para que el ordenador me reconociese el movil, pero al final he podido.

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35331701585150 CERT:RED
FLASH CID:49 COLOR:RED

Model:K510i
Brand:Orange (Amena)
MAPP CXC article: R4EC001 prgCXC1250231_GENERIC_CO
MAPP CXC version: R4EC001
Language Package:ORANGE_CH
CDA article: CDA102460/136
CDA version: R1A
Default article: cxc1250246
Default version: R4EC001

Network LOCKED
Operator: 214-03

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R4EC001_CXC1250231_GENERIC_CO"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed:302 secs.
Will backup GDFS now.
unknown ChipID (0), RETRY
phone pre-boot failed,possible RECOVERY needed.
Elapsed:0 secs.


Tambien he intentado hacer un backup de gdfs pero no he podido. El log es el siguiente:

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35331701585150 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
can't open file "C:\Documents and Settings\KAROVE\Mis documentos\Liberar\Setool2Lite_v1.10\rest\R4EC001_ CXC1250231_GENERIC_CO"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
wrong response, break.
failed, that is fatal
Elapsed:270 secs.

Espero que con esta informacion me puedas ayudar.
Gracias por tu interes.
Un saludo.

No temas, es sencillo tu error, haz lo que dice este tuto:

1.ir a la carpeta make_rest del setool.
2. Arrastrar su MAIN (.mbn) sobre el ssw2rest.exe, se generara un archivo
3. Cortan y pegan ese archivo (SIN CAMBIAR NOMBRE) en la carpeta REST del settol
4. Flasheen MAIN, y vuelkvan a intentar

aaa1

Hola Dj_RuLaZ.
Despues de arrastrar el Main sobre ssw2rest.exe no he podido encontrar el archivo generado.
He vuelto hacer los pasos del tutorial y me da la sensacion que ahora si lo he hecho bien y que el movil ya esta liberado, pero el movil sigue sin encenderse. Te posteo el log:

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35331701585150 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EC001_CXC1250231_GENERIC_CO
Restore from:R4EC001_CXC1250231_GENERIC_CO
can't open file "C:\Documents and Settings\KAROVE\Mis
documentos\Liberar\Setool2Lite_v1.10\rest\R4EC001_ CXC1250231_GENERIC_CO"
Starting to process VKP patch script: C:\Documents and Settings\KAROVE\Mis documentos\SIM-Lock Patch
Generator\vkp\Remove_SIM_lock_K510_R4EC001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44D80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:138 secs.

Si esto esta bien, ¿cual puede ser el problema?
Un saludo.