Ayuda K310

Hola.... se ha parado el flasheo de mi K310 mientras ponia executind loader.... tengo el gdfs alguien me pude ayudar???

GRACIAS.

Flashea de nuevo desde el principio.
Si tenes algun problema, postea el log del SETool2 y lo vemos.

No puedo flashearlo otra vez ni me lo identifica....

Aqui pongo el log:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxCERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4HA014 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4HA014
Language Package:AMERICA_2
CDA article: CDA102737/107
CDA version: R1A
Default article: cxc1250728
Default version: R4HA014

Network LOCKED
Operator: 214-03

USERCODE:0000

Elapsed:44 secs.
Going to execute VKP script....
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:43 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/107
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
can't open file "C:\Documents and Settings\Usuario\Escritorio\MOVIL\setool2lite108\r est\R4HA014_CXC1250719_GENERIC_ME"
writing C:\Documents and Settings\Usuario\Escritorio\MOVIL\W200_R4HA014_FS_ AMERICA_2_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2340
Will flash 117 blocks...
SSW loading returns:0
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Abort all operations.
Can't get packet properties.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:504 secs.


GRACIAS

Te falta el REST del MAIN R4HA014.
Si tenes el main generalo con el utilitario del SETool, y si no, creo que esta en la zona de descarga, o por ultimo, baja el main R4HA014 (el de tu modelo, que es CID49) y genera el REST.

Si tenes el main, copialo a la carpeta make_rest del SETool2 y corre el programa ssw2rest.exe pasandole como parametro el MAIN.
Cuando termina, te genera un archivo que tenes que copiarlo a la carpeta rest del SETool2.

Una vez hecho esto, flashea de nuevo desde cero.

He bajado dde este foro un rest lo he añadido a la carpeta rest... pero aun asi no reconoce el telefono y no ace nada.

GRACIAS

Me podrias decir:
1.- que archivos estas cargando y en que campo?
2.- que boton estas presionando?

Estoy cargando ya que es el firm del W200, FS R4HA014 (files) y el CUSTOM (Misc Files) y le oy a flash pero nada....

Boton presionado "C"

A ver si entiendo, estas cargando:
1.- en files: dos archivos, el MAIN y el FS
2.- en MISC files: el custom (un archivo .zip)
Le das a FLASH, y no pasa nada.

Si estas haciendo lo anterior, y tenes problemas, debe ser la GDFS.
Antes dijiste que la repaldaste, entonces, cargala en MISC files y apreta "Write GDFS".

Luego intenta flashear de nuevo como K310 y no como W200.

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
Will write GDFS now.
will write 1575 variables
unit 1/3CA write fail, err: 11
cut length from 1635(03/0FE3)
unit 3/FE3 write fail, err: 11
cut length from 4760(03/13D8)
unit 3/13D8 write fail, err: 11
cut length from 2035(03/13ED)
unit 3/13ED write fail, err: 11
cut length from 1635(04/1B9E)
unit 4/1B9E write fail, err: 11
cut length from 1637(05/1F8D)
unit 5/1F8D write fail, err: 11
cut length from 5950(05/2365)
unit 5/2365 write fail, err: 11
unit 6/2710 write fail, err: 1D
unit 6/2711 write fail, err: 1D
unit 6/2712 write fail, err: 1D
unit 6/2713 write fail, err: 1D
unit 6/2714 write fail, err: 1D
unit 6/2715 write fail, err: 1D
unit 6/2716 write fail, err: 1D
unit 6/2717 write fail, err: 1D
unit 6/2718 write fail, err: 1D
unit 6/2719 write fail, err: 1D
unit 6/271A write fail, err: 1D
unit 6/271B write fail, err: 1D
unit 6/271C write fail, err: 1D
unit 6/271D write fail, err: 1D
unit 6/271E write fail, err: 1D
unit 6/271F write fail, err: 1D
unit 6/2720 write fail, err: 1D
unit 6/2721 write fail, err: 1D
unit 6/2722 write fail, err: 1D
unit 6/2723 write fail, err: 1D
unit 6/2724 write fail, err: 1D
unit 6/2725 write fail, err: 1D
unit 6/2726 write fail, err: 1D
unit 6/2727 write fail, err: 1D
unit 6/2728 write fail, err: 1D
unit 6/2729 write fail, err: 1D
unit 6/272A write fail, err: 1D
unit 6/272B write fail, err: 1D
unit 6/272C write fail, err: 1D
unit 6/272D write fail, err: 1D
unit 6/272E write fail, err: 1D
unit 6/272F write fail, err: 1D
unit 6/2730 write fail, err: 1D
unit 6/2731 write fail, err: 1D
unit 6/2732 write fail, err: 1D
unit 6/2733 write fail, err: 1D
unit 6/2734 write fail, err: 1D
unit 6/2735 write fail, err: 1D
unit 6/2736 write fail, err: 1D
unit 6/2737 write fail, err: 1D
unit 6/2738 write fail, err: 1D
unit 6/2739 write fail, err: 1D
unit 6/273A write fail, err: 1D
unit 6/273B write fail, err: 1D
unit 6/273C write fail, err: 1D
unit 6/273D write fail, err: 1D
unit 6/273E write fail, err: 1D
unit 6/273F write fail, err: 1D
unit 6/2740 write fail, err: 1D
unit 6/2741 write fail, err: 1D
unit 6/2742 write fail, err: 1D
unit 6/2743 write fail, err: 1D
unit 6/2744 write fail, err: 1D
unit 6/2745 write fail, err: 1D
unit 6/2746 write fail, err: 1D
unit 6/2747 write fail, err: 1D
unit 6/2748 write fail, err: 1D
unit 6/2749 write fail, err: 1D
unit 6/274A write fail, err: 1D
unit 6/274B write fail, err: 1D
unit 6/274C write fail, err: 1D
unit 6/274D write fail, err: 1D
unit 6/274E write fail, err: 1D
unit 6/274F write fail, err: 1D
unit 6/2750 write fail, err: 1D
unit 6/2751 write fail, err: 1D
unit 6/2752 write fail, err: 1D
unit 6/2753 write fail, err: 1D
unit 6/2754 write fail, err: 1D
unit 6/2755 write fail, err: 1D
unit 6/2756 write fail, err: 1D
unit 6/2757 write fail, err: 1D
unit 6/2758 write fail, err: 1D
unit 6/2759 write fail, err: 1D
unit 6/275A write fail, err: 1D
unit 6/275B write fail, err: 1D
unit 6/275C write fail, err: 1D
unit 6/275D write fail, err: 1D
unit 6/275E write fail, err: 1D
unit 6/275F write fail, err: 1D
unit 6/2760 write fail, err: 1D
cut length from 5950(06/2761)
unit 6/2761 write fail, err: 11
unit 6/2762 write fail, err: 1D
unit 6/2763 write fail, err: 1D
unit 6/2764 write fail, err: 1D
unit 6/2765 write fail, err: 1D
unit 6/2766 write fail, err: 1D
unit 6/2767 write fail, err: 1D
unit 6/2768 write fail, err: 1D
unit 6/2769 write fail, err: 1D
unit 6/276A write fail, err: 1D
unit 6/276B write fail, err: 1D
unit 6/276C write fail, err: 1D
unit 6/276D write fail, err: 1D
unit 6/276E write fail, err: 1D
unit 6/276F write fail, err: 1D
unit 6/2770 write fail, err: 1D
done
Phone detached
Elapsed:164 secs.

Son normales tanto error todavia no me lo identifica voy a buscar el firm del k310 mientras.


GRACIAS

No me carga el fimw del K310_R4EA031...

como si no enxufase nada

Intenta cargar la GDFS con Phone XS.
A mi me paso algo parecido, y me anduvo mejor cargar el mismo backup con Phone XS.
Busca en el foro que hay un instructivo, ahora no me acuerdo donde esta.

cuando te pida que enchufes el cable y c , a demas de hacer eso, mantené presionadas las teclas 2 y 5. capas que ahi te lo reconoce




si te ha servido agradéceme

Hola muchas gracias a todos pero ahora mientras cargaba el firmware a dado este nuevo error.

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102737/16
MODEL:Melinda Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102570/22
CDA version: R8A
Default article: cxc1250474
Default version: R4DA044

Network LOCKED
Operator: 214-03

USERCODE:0000

Elapsed:32 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:18 secs.
Abort all operations.
Can't load id loader !
Elapsed:18 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102570/22
CDA version: R8A
Default article: cxc1250474
Default version: R4DA044

Network LOCKED
Operator: 214-03

USERCODE:0000

Elapsed:7 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:13 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxxx CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
writing C:\Documents and Settings\Usuario\Escritorio\MOVIL\K310\K310_R4EA03 1_FS_MEDITERR_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:117
Will flash 117 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Usuario\Escritorio\MOVIL\K310\K310_R4EA03 1_MAIN_GENERIC_DO_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:304
Will flash 304 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Send subblock NAK
Send subblock NAK
Elapsed:557 secs.

He acabado parandolo yo mismo porque solamente salian errores y no seguia.

Ayuda por favor

GRACIAS

Hola, serviria de algo intentar poner la erom aunque nose si podría porque no consigo ahora despues de esto que los programas me reconozcan el movil...

AYUDA PORFAVOR

GRACIAS

Hola, a mi me paso jsto lo mismo, alguien sabria solucion para ello???

Gracias de ante mano.

ustedes quieren flashearlo a w200? prueben subiendole los archivos nuevamente y con la bateria al 100% y siguiendo el tutorial de flasheo: http://www.topsony.com/forum_es/showthread.php?t=28726

no se guien por las imagenes porque estan desordenadas, mejor sigan los puntos, paso a paso.


si te ha servido agradéceme