Mi celular no responde!!

Versión para imprimir

Mostrar 40 mensajes de este tema en una página

18/01/2008, 03:07:13
Vanguters

Mi celular no responde!!

Buenas noches, yo vivo en Mexico, y uso un celular w580 de Telcel. Desde ayer tenia las ansias de desbloquearlo, y de paso, de usar los skins de walkman, y unos temas flash que habia encontrado meses antes en una pagina.

Descargue el STL 1.11, e intente desbloquearlo, tuve un monton de problemas, al final nunca se pudo abrir, pero se me ocurrio utilizar el flasheo para colocarle un skin de walkman, para saber si funcionaba... resulta que tardo como 10 minutos, y al ultimo paso, me salio un mensaje de que no se podia ( esta en negritas). Quite el cable, y enseguida lo intente prender, pero fue inutil. No se pudo encender.

Cual fue el problema, y como soluciono esto?

Elapsed:0 secs.
Elapsed:0 secs.
Abort all operations.
Elapsed:58 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:45 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:44 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:35 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:31 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:69 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1370
Found:1015 variables
Found:310 variables
Found:45 variables
GDFS read all done, GDFS_35683401759324.BIN written
Phone detached
Elapsed:44 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:******* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:16 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:85 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:******** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Leftar\Escritorio\w580.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:71 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:******* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

Starting to process VKP patch script: C:\Documents and Settings\Leftar\Escritorio\w580.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:12 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Leftar\Escritorio\w580.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:10 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:20 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:47 secs.
Abort all operations.
Elapsed:9 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:******* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:******* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
LDR: DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:709 secs.
18/01/2008, 12:39:46
diego428

Re: Mi celular no responde!!

trata de modificar tu w580 con far para DB2020 te sera mas facil y luego comentanos haber si pudistes!!!
18/01/2008, 15:29:44
alejo580

Re: Mi celular no responde!!

bueno primero que todo la proxima vez que muestres el log de resultados porfavor pero porfavor fijate en no colocar el numero de tu imei ya que te lo pueden clonar el imei y estarias en problemas
pero bueno tu dices que lo ibas a liberar por parche pero no pudiste y luego lo fuiste a flashar colocandole los menu flash pero lo que yo veo en el blog es que terminaste por subirle el parche ; ademas recuerda que con el setool debes de colocar los swf en la estructura de direccion de carpetas y comprimirla en zip colocarlos en misc files y darle flash ademas recuerda que cuando te aparaesca el mensaje desconectar el cable quitar la bateria y luego insertarla conectar el cable y luego darle en ready
bueno cuando el equipo te encienda de nuevo te recomiendo usar el xs++3.1 es mucho mas fasil porque solo entras a la fs y arrastras lo que le vas a meter desde el pc a la ruta luego le das shoutdown luego close y esta listo no debes hacerle nada mas te dejo este tuto que esta superfacil
http://www.topsony.com/forum_es/showthread.php?t=40150
recuerda agradecer la ayuda que te sirva :D
18/01/2008, 17:03:41
Vanguters

Re: Mi celular no responde!!

no entiendo lo que dice este log, me podrian ayudar?? Por cierto, el xs++ se ve muy sencilllo pero cual es link de descarga??

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:14 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:33 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:42 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:26 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:25 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********* CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:17 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:12 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:12 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:9 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:7 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:7 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:5 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:********** CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
only FLASH operation supported in that mode
Elapsed:12 secs.

Sigue igual... no se prende.... cual es el verdadero problema??.... como lo tengo que resolver????
18/01/2008, 17:36:46
alejo580

Re: Mi celular no responde!!

esta ahi mismo en el link que te deje donde dice en negrilla xs++v3.1 ese es el link de descarga si no te sirve ese link usa la opcion buscar

no dudes en agradecer la ayuda que te sirva :D
18/01/2008, 18:48:58
carlosmx3

Re: Mi celular no responde!!

no te deja hacer nada? se me hace raro que te diga "only FLASH operation supported in that mode" estas usando usb cable? aparte te dice que posiblemente necesites un recovery
18/01/2008, 19:04:09
Vanguters

Re: Mi celular no responde!!

si, uso el cable que viene con el w580, intente hacer un recovery, pero no me funciono
18/01/2008, 19:20:28
carlosmx3

Re: Mi celular no responde!!

No puedes hacer recovery con usb tiene que ser con cable de servicio, has intentado meter de nuevo el main fs y cda o tampoco te deja hacer eso
18/01/2008, 19:27:45
Vanguters

Re: Mi celular no responde!!

bueno, entonces como lo recupero??
18/01/2008, 19:42:11
hyber_99

Re: Mi celular no responde!!

el problema es el parche que le querias meter, flashea solo la main y tiene que encender.
saludos y postea resultados

Mostrar 40 mensajes de este tema en una página