Versión para imprimir
holas estaba chekando el foro, y vi hablar mucho sobre este programa asi que decido bajarlo, bueno lo instale y lo primero que hice fue prefionar "identify" luego de eso si mal no recuerdo precione "read flash" bueno lo malo es que despues de eso mi telefno no ha vuelto a prender... :'( que puedo hacer????
la verdad que yo queria desbloquearlo, pero no lo pensaba hacer hasta no saber usarlo... pero esta vez de casualidad creo que la malogre... :'( alguen me puede ayudar
gracias!
saludos[TUTORIAL] ¿Cómo postear el LOG de Identify? - Top Sony luego esto LOGs comunes setool2lite, LEER ANTES DE POSTEAR! - Top Sony y como veo que eres nuevo pues esto Soy Recien Iniciado ¿¿¿¿¿¿que hago?????? - Top Sony
gracias voy a poner la info
en la primera sesion aparece:
en la segundaCódigo:welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1DB001_CXC1250514_EU_1_CR
Restore from:R1DB001_CXC1250514_EU_1_CR
can't open file "C:\DOCUME~1\Dudri\CONFIG~1\Temp\7zO27D.tmp\rest\R1DB001_CXC1250514_EU_1_CR"
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:82 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:9 secs.
Elapsed:9 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:0 secs.
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:8 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1DB001_CXC1250514_EU_1_CR
Restore from:R1DB001_CXC1250514_EU_1_CR
can't open file "C:\DOCUME~1\Dudri\CONFIG~1\Temp\7zO27D.tmp\rest\R1DB001_CXC1250514_EU_1_CR"
Elapsed:21 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:0 secs.
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:9 secs.
Elapsed:9 secs.
phone pre-boot failed,possible RECOVERY needed.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:231 secs.
file can't be found or opened
Elapsed:0 secs.
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1DB001_CXC1250514_EU_1_CR
Restore from:R1DB001_CXC1250514_EU_1_CR
can't open file "C:\DOCUME~1\Dudri\CONFIG~1\Temp\7zO27D.tmp\rest\R1DB001_CXC1250514_EU_1_CR"
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:28 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
y en la ulima... que aqui creo que la malogre...Código:welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:6 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:6 secs.
Elapsed:6 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:3 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1DB001_CXC1250514_EU_1_CR
Restore from:R1DB001_CXC1250514_EU_1_CR
can't open file "C:\DOCUME~1\Dudri\CONFIG~1\Temp\7zO299.tmp\rest\R1DB001_CXC1250514_EU_1_CR"
Elapsed:38 secs.
Abort all operations.
Can't load id loader !
Elapsed:55 secs.
Elapsed:55 secs.
Abort all operations.
Can't load id loader !
Elapsed:35 secs.
Abort all operations.
Can't load id loader !
Elapsed:37 secs.
ahora cuando pongo identify me apareceCódigo:Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:5 secs.
Elapsed:5 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R1DB001 prgCXC1250514_EU_1_CR
MAPP CXC version: R1DB001
Language Package:AMERICA_2
CDA article: CDA102663/25
CDA version: R2A
Default article: cxc1250522
Default version: R1DB001
Network LOCKED
Operator: 716-10
USERCODE:0000
Elapsed:0 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:200D
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
Restore from:C:\Documents and Settings\Dudri\Escritorio\rest\R1DB001_CXC125952_EU_1_CL
CSloader version:
COMPACT_SEMC_FS_LOADER_SETOOL2 LITE
loader startup: executed
loader filesystem startup: executed
Can't get packet properties.
wrong response, break.
loader GDFS startup failed, that is fatal
Elapsed:412 secs.
Código:welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35167401171745 CERT:RED
FLASH CID:49 COLOR:RED
Elapsed:6 secs.
Especifica un poco mas que es lo que quieres hacer
1 Flashear
2 Subir archivos (acoustics,camdrivers,iconos de menu, etc)
3 Aplicar Parches
? Jacko ya te puso los links necesarios pero especifica que es lo que necesitas
antes de cualquier cosa.usa la vercion mas actual de setool.la 1.11 ya que usas la 1.08...despues, Can't get packet properties.
wrong response, break.
loader GDFS startup failed, that is fatal
Elapsed:412 secs. ya esta en el link de logs comunes que solo hay que subir main y listo
hola!!!Cita:
Iniciado por sukisux4
lo que quiero es que prenda de nuevo... :'( no prende!!!!
prendia hace una hora!! y ahora no!!!
ya he estado chekanod los links y me doy cuenta que es muy "tuneable" pero lo malo es como te digo que no lo puedo prender... parece que le paso algo y ya no prende
:a36:
amigo ya te respondi como subir el cda.e includo te puse el nombre por si lo quieres bajar de google.Carolina_i_CDA102580_14_R1A_Generic_AMERICA _2.sube main,fs y luego cda y listo
pues amigo solo hasle un fulflash solo le deves de cargar el main y el fs con su respectivo custom
Read Flash. Sirve para iniciar el proceso de lectura de flash que se establecio en Read Setup.
te recomiendo que te pases por estos tutos ya que esto es demaciado facil}
Soy Recien Iniciado ¿¿¿¿¿¿que hago??????
Tutorial Generalizado de SETool2 Lite V1.11
estos ya te los abian posteado nuestroa amigo jacko
TEMA RESUELTO DA EL TEMA COMO CERRADO
hola yo t ayudo...
vas a necesitar los archivos necesarios para flashear...
que son la FS,MAIN...Y el CDA...red49
ya q como dices...le diste a flashear...pero sin ningun archivo...xd por eso no prende
buscate estos tres archivos
t vas a leer este tuto..para entenderlo mejor..y no volver a hacer algo mal..y sacarle el maximo provecho al programa
Tutorial Generalizado de SETool2 Lite V1.11 - Top Sony
por cierto..tu cel es un db2010 cid 49...necesitas esto para q finalize de manera adecuada
RestMaker [Rest File Tool] - Top Sony
saludos..cualquier cosa..hay dices
gracias de verdas, ahora estoy descargando los programas y espero poder tener mi celular funcionando, y si he estado leyendo los post, pero para la proxima empesare por leerlos y despues por usar los programas, Jacko no habia leeido tu primera respuesta mi pagina no se habia actualizado, me di cuenta de ella una ves que ya habi aescrito.
saludos!
hola!Cita:
Iniciado por J0rGe
doc pero donde encuentro esos archivos y como se cuales son? como los identifico??? veo un monton de links pero no se cual descargar :'(
gracias!