Respuesta: Problema con K810
RESTORATION FILE NOT PRESENT
"R1JD001_CXC1250669_GENERIC_LI"
amigo te falta el archivo rest....edito:
era solo para que lo supieras...puede ser un problema fisico.....
saludos
Respuesta: Problema con K810
Cita:
Iniciado por
FOAD
Miren este es mi gran problema con un K810 no lopuedo flashear ni con el cable de servicio....
miren
v0.914029/UNI
CARD SERIAL: 00047987
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 9 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
Model:K810i
Brand:Generic Trade
MAPP CXC article: R8BA024 prgCXC1250811_GENERIC_SM
MAPP CXC version: R8BA024
Language Package:AMERICA_2
CDA article: CDA102568/107
CDA version: R4A
Default article: cxc1250813
Default version: R8BA024
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
RESTORATION FILE NOT PRESENT
"R8BA024_CXC1250811_GENERIC_SM"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE
Elapsed: 16 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
phoneid error 1
Phone info read error !
Elapsed: 3 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 11 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
ldr_on_ldr hdr no ack (10)
Elapsed: 3 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 105 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 38 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:51
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35601901029421 CERT:RED
FLASH CID:51 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
bypassing security...
No server found.
unlock failed, that is fatal
Elapsed: 12 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:51
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35601901029421 CERT:RED
FLASH CID:51 COLOR:RED
Model:K550i
Brand:Generic Trade
MAPP CXC article: R1JD001 prgCXC1250669_GENERIC_LI
MAPP CXC version: R1JD001
Language Package:EUROPE_1
CDA article: CDA102568/10
CDA version: R6A
Default article: cxc1250671
Default version: R1JD001
PROVIDER: 000-00
Network LOCKED
RESTORATION FILE NOT PRESENT
"R1JD001_CXC1250669_GENERIC_LI"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED
SECURITY UNITS BACKUP CREATED.
Elapsed: 9 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:51
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35601901029421 CERT:RED
FLASH CID:51 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
bypassing security...
No server found.
unlock failed, that is fatal
Elapsed: 17 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 22 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35315302042980 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
ldr_on_ldr hdr no ack (10)
Elapsed: 7 secs.
Eso es problema físico "no ack" es que no hay respuesta del FlashChip. Puedes probar con calor en el flashchip o limpiando conectores ;).
Saludos!
Respuesta: Problema con K810
Donde consigo el rest de ese modelo
Respuesta: Problema con K810
El rest lo haces simplemente marcando use signed mode solamente y agregando el Main actual de tu telefono en Files y le das identify.
El Main para generar el rest debe ser igual al de tu teléfono. El que vayas a flashear despues puede ser el que gustes.
Respuesta: Problema con K810
1 no se necesita el rest por ser db2020, solo para liberarlo, 2 no se marca signed mode para generar el rest lo genera solito al poner el main y haser el identify,
no marcques enable by pass para flasheo solo signed mode , siquieres mas ayuda por favor postea en el lugar correcto hay un foro para soporte de se tool box, saludos
carga tu bateria a full
agrega el main en add files
marca en settings signed mode
presiona flash e inserta tu telefono con las teclas 2 y 5
si no lo reconoce haslo por com
fijate que no tenga humedad
si no sale es problema fisico, me llama la ayencion que dices que es k810 y en un log mas abajo dice k510
