Versiķn para imprimir
tengo un w600 que al cuztomatizar me pone failed y me prende en blanco
no puedo hacer un full gdfs ya que no me pone unlock rsa que hago se me estan complicando los w600 los flash que uso son los que siempre he cargado y no tengo problemas.
saludos y gracias kronosmx.
amigo es facil mira si no me equivoco tu telefono es color bromw cierto ? si no pasame el logs de lo q te arroja la cruiser , volviendo al tema si es bromw pāsalo a red ve a la pestaņa de unlock rsa abajo del lado derecho čudes cambair el color de tu telefono pasalo a red y listo ahora si vuelves a hacer el procedimiento si tiens mas problemas agregame a msn messenger
gracias amigo christiam este es el post del procedimiento que me dijiste lo cambie a red.
System diagnostics passed.
Version 12.00 ready!
[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Brown
Flash certificate: A1_DB2010_49_BROWN
Trying Brown CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 49
Primary certificate color: Brown
Secondary certificate not found.
GDFS configuration found.
OSE configuration found.
TestProgram configuration not found.
Analysing GDFS...
Done.
RSA protection is normal.
Phone hardware initialized OK
[ --- Change Certificate Color --- ]
Analyzing firmware...
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Primary certificate has been overwritten.
Time: 00:00:02
Flash process done.
Turning off phone...
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W600i_CXC1123106_NAM1_R7B039_Brown49.cw6sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.
[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:00:00
Flash process done.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W600i_CXC1123106_NAM1_R7B039_Brown49.cw6sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
Baudrate = 921600Bd
Programming flash...
RSA protection was set back to normal.
Time: 00:06:07
Flash process done.
[ --- Flash Raw File System --- ]
Flash file: "W600i_CXC1123107_All-in-One_CustomV1_R7B039_Brown49.cw6fs"
Waiting for flash file to load...
Reading phone RSA certificate...
Preparing to program flash...
Analysing flash file...
Programming flash...
Time: 00:04:52
Flash process done.
[ --- Customize File System --- ]
Sending CS applet...
The applet ignored baudrate change request!
[ --- Turn off Phone --- ]
Turning off phone...
y el error que me da es este
no response for applet
invalid response.
o cual seria el precedimiento al cambiarlo a red. amigo christiam.
hola pues mira hiciste todo bien pero algun daņo tiene la logica quiero pensar que con un tespoint se puede arreglar , u otra seria ver si el telefono no tiene mojada la tableta madre limpiala con isopropilico y un cepillo de dientes
el procedimiento de pasrl oa rojo era que te dejara hacer el unlock rsa ya que en cafe no te dejaba hacerlo
tampoco testpoint y la tarjeta esta limpia, pues gracias por los consejos
y damos por cerrado el tema.
saludos kronosmx