w810 no se puede flashear

yo e tenido 3 w810 y los e flasehado muy facil, casi a diario los flasheaba, ahora compre un w580 y tambien lo flashe sin ningun probrema, pero resulta que un amigo tiene un w810 y me pidio que se lo flasheara, (facil!, pense yo), yo por preferencia flasheo con el xs++, y cuando le doy conectar me sale esto:

***** Flashprops (cmd 0B)
Phone-XS GUI Build V2.01 Beta Ready!
System Diagnostics check: OK!
Hold 'C' and connect cable to phone. You have 30seconds...
***** Wait for 0x5a
***** ?
DBID : 8040 (db2010 Marita compact)
proto : 3.1
pad : ffffffff
***** ?
***** PRODUCTION_ID_LOADER
sending loaders\db2010_cid00_prodid_p3h.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 6532 bytes
Wait for EaTEbS
Failed
Apparently there is a file missing
sending loaders\CID49_RED_DB2010_FLASHLOADER_P5G.bin
QH00 Header
Wait for EsB
Wait for EhM
Failed


tambien ya probe con el setool y me sale esto:
welcome to setool2 lite edition v 1.08


supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100186419 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4CK003 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4CK003
Language Package:EUROPE_1
CDA article: CDA102555/10
CDA version: R5A
Default article: cxc1250324
Default version: R4CK003

Operator: 000-00

USERCODE:0000

Elapsed:1 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100186419 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4CK003_CXC1250316_GENERIC_HN
Restore from:R4CK003_CXC1250316_GENERIC_HN
writing C:\Documents and Settings\dinora\Mis documentos\sony ericson\w810 MAIN_FS_Y_CUSTOM_GENERIC\W810_R4EK001_MAIN_GENERIC _HN_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:344
Will flash 344 blocks...
SSW loading returns:0
writing C:\Documents and Settings\dinora\Mis documentos\sony ericson\w810 MAIN_FS_Y_CUSTOM_GENERIC\W810_R4EK001_FS_AMERICA_2 _RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:157
Will flash 157 blocks...
SSW loading returns:0
Elapsed:371 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102555/107
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906100186419 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4EK001_CXC1250316_GENERIC_HN
Restore from:R4EK001_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\dinora\Mis documentos\sony ericson\seetool108\rest\R4EK001_CXC1250316_GENERIC _HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:66 secs.

hola si no me equivoco tienes algun error en tu gdfs no sigas enchufandolo!!!!

amigo creo que dice no puede abrir el archivo rest que tiene el setool porque no coincide con el del cel, deberias de crear el rest correspondiente con el firmware de tu cel y colocarselo a la carpeta rest del setool. (si estoy mal que alguien me corrija)

El setool no actua si no tiene el rest correspondiente al firmware del movil.

postea la version del firware para conseguirte el rest file

tiene la R4CK003

pero que me aconsejan que haga?

usa el phone xs++ 3.1 para flashear tu equipo,yu nestas usando la 2.01 beta que ya es muy antigua,o genera el rest para el nuevo firm y utiliza setool

Con el Setool2Lite simplemente ubica el REST en la carpeta correspondiente: rest

No es problema de rest, como dijo @pollo25 hay un problema de GDFS, (con Setool)