No puedo borrar /usb/other/gfx
Resulta que le meti un PACK de iconos al celular, pero luego, simplemente me decidi a desinstalarlos, bueno simplemente pase los iconos del sig archivo Original Icon R4DB005 W810, cosa no muy inteligente de mi parte ya que el mio es CID49 R4EK001.
Ahora que intento borrar, copiar los iconos correctos o cualquier cosa con esa carpeta, el FAR Manager se me cuelga, al tratar con el Phone XS 2 se queda cargando aunque lo deje ya casi 3 horas, igual con el XS++.
Código:
17:48:38| Phone-XS GUI Build V2.10 Alpha Ready!
17:48:38| System Diagnostics check: OK!
17:48:59| Attempting to open the interface...
17:48:59| ++++++++++++++++++++++++++++++++++
17:48:59| Turn off phone
17:48:59| Hold C Button on phone and connect phone.
17:48:59| You have 30 seconds.
17:48:59| ++++++++++++++++++++++++++++++++++
17:48:59| PORT STATUS: ACTIVE
17:49:20| Sorry, brown phones are NOT SUPPORTED
17:49:20| +++ Sendinging shutdown signal to phone...
17:49:22| Shutting down...
17:49:22| Phone-XS GUI Build V2.10 Alpha Ready!
17:49:22| System Diagnostics check: OK!
17:49:26| Attempting to open the interface...
17:49:26| ++++++++++++++++++++++++++++++++++
17:49:26| Turn off phone
17:49:26| Hold C Button on phone and connect phone.
17:49:26| You have 30 seconds.
17:49:26| ++++++++++++++++++++++++++++++++++
17:49:29| PORT STATUS: ACTIVE
17:49:30| DBID: 8040 (db2010 Marita compact)
17:49:30| proto: 3.1
17:49:30| sending loaders\db2010_cid00_prodid_p3k.bin
17:49:30| QH00 Header
17:49:30| Wait for EsB
17:49:30| Wait for EhM
17:49:30| QA00 Prologue 6532 bytes
17:49:30| Wait for EaTEbS
17:49:30| QD00 Payload 35540 bytes
17:49:30| Wait for EdQ
17:49:30| This is a PRODUCTION_ID loader
17:49:30| Activating GDFS...
17:49:31| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W810)
17:49:31| ...using GDFS name
17:49:31| ++++++++++++++++++++++++++++++++++
17:49:31| PHONE INFO
17:49:31| ++++++++++++++++++++++++++++++++++
17:49:31| DBID: db2010
17:49:31| OPT CID: 49
17:49:31| EROM CID: 49
17:49:31| EROM color: red
17:49:31| IMEI: 35462301xxxxxx
17:49:31| Phone: W810
17:49:31| Operator: AMERICA_2
17:49:31| CDA: CDA102555/107 R2A
17:49:31| Firmware: R4EK001
17:49:31| EROM: n/a
17:49:31| ++++++++++++++++++++++++++++++++++
17:49:31| ready for operation!
17:49:45| +++ sending CS_LOADER...
17:49:45| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:49:45| Header
17:49:46| Prologue 6520 bytes
17:49:46| Payload 478225 bytes
17:49:47| This is a CS loader
17:49:47| ***** Loader activation (cmd 01-09)
17:49:47| ***** GDFS activation (cmd 04-05)
17:50:01| ***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
17:50:01| Binary answer is: 04-ff
17:50:01| This loader is LOCKED (errorcode=30)
17:50:01| ***** Auth startup (cmd 05-50)
17:50:01| ***** AuthA (cmd 05-42) hacking
17:50:12| 1000...
17:50:25| 2000...
17:50:37| 3000...
17:50:49| 4000...
17:50:52| ...4201
17:50:52| Matches: 0:0003934, 1:000266, 2:0001, 3:0
17:50:52| Totals : 0:0003934, 1:000266, 2:0001, 3:0
17:50:52| Theory : 0:0003938, 1:000261, 2:0001, 3:0
17:50:52| ***** Reset (cmd 01-0C)
17:50:52| Waiting for the phone to disconnect
17:50:52| Waiting for the phone to reconnect
17:50:55| DBID: 8040 (db2010 Marita compact)
17:50:55| proto: 3.1
17:50:55| ***** sending PRODUCTION_ID_LOADER
17:50:55| sending loaders\db2010_cid00_prodid_p3k.bin
17:50:55| QH00 Header
17:50:55| Wait for EsB
17:50:55| Wait for EhM
17:50:55| QA00 Prologue 6532 bytes
17:50:55| Wait for EaTEbS
17:50:55| QD00 Payload 35540 bytes
17:50:55| Wait for EdQ
17:50:55| This is a PRODUCTION_ID loader
17:50:55| +++ sending CS_LOADER...
17:50:55| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:50:55| Header
17:50:55| Prologue 6520 bytes
17:50:56| Payload 478225 bytes
17:50:57| This is a CS loader
17:50:57| ***** Loader activation (cmd 01-09)
17:50:57| ***** GDFS activation (cmd 04-05)
17:51:11| ***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
17:51:11| Binary answer is: 04-ff
17:51:11| This loader is LOCKED (errorcode=30)
17:51:11| ***** Auth startup (cmd 05-50)
17:51:11| ***** AuthA (cmd 05-42) hacking
17:51:25| 1000...
17:51:37| 2000...
17:51:49| 3000...
17:52:01| 4000...
17:52:03| ...4201
17:52:03| Matches: 0:0003950, 1:000250, 2:0001, 3:0
17:52:03| Totals : 0:0007884, 1:000516, 2:0002, 3:0
17:52:03| Theory : 0:0007876, 1:000523, 2:0002, 3:0
17:52:03| ***** Reset (cmd 01-0C)
17:52:03| Waiting for the phone to disconnect
17:52:04| Waiting for the phone to reconnect
17:52:07| DBID: 8040 (db2010 Marita compact)
17:52:07| proto: 3.1
17:52:07| ***** sending PRODUCTION_ID_LOADER
17:52:07| sending loaders\db2010_cid00_prodid_p3k.bin
17:52:07| QH00 Header
17:52:07| Wait for EsB
17:52:07| Wait for EhM
17:52:07| QA00 Prologue 6532 bytes
17:52:07| Wait for EaTEbS
17:52:07| QD00 Payload 35540 bytes
17:52:07| Wait for EdQ
17:52:07| This is a PRODUCTION_ID loader
17:52:07| +++ sending CS_LOADER...
17:52:07| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:52:07| Header
17:52:07| Prologue 6520 bytes
17:52:07| Payload 478225 bytes
17:52:09| This is a CS loader
17:52:09| ***** Loader activation (cmd 01-09)
17:52:09| ***** GDFS activation (cmd 04-05)
17:52:23| ***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
17:52:23| Binary answer is: 04-ff
17:52:23| This loader is LOCKED (errorcode=30)
17:52:23| ***** Auth startup (cmd 05-50)
17:52:23| ***** AuthA (cmd 05-42) hacking
17:52:35| 1000...
17:52:47| 2000...
17:52:58| 3000...
17:53:09| 4000...
17:53:12| ...4201
17:53:12| Matches: 0:0003944, 1:000257, 2:0000, 3:0
17:53:12| Totals : 0:0011828, 1:000773, 2:0002, 3:0
17:53:12| Theory : 0:0011815, 1:000784, 2:0003, 3:0
17:53:12| ***** Reset (cmd 01-0C)
17:53:12| Waiting for the phone to disconnect
17:53:12| Waiting for the phone to reconnect
17:53:15| DBID: 8040 (db2010 Marita compact)
17:53:15| proto: 3.1
17:53:15| ***** sending PRODUCTION_ID_LOADER
17:53:15| sending loaders\db2010_cid00_prodid_p3k.bin
17:53:15| QH00 Header
17:53:15| Wait for EsB
17:53:15| Wait for EhM
17:53:15| QA00 Prologue 6532 bytes
17:53:15| Wait for EaTEbS
17:53:15| QD00 Payload 35540 bytes
17:53:15| Wait for EdQ
17:53:15| This is a PRODUCTION_ID loader
17:53:15| +++ sending CS_LOADER...
17:53:15| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:53:15| Header
17:53:16| Prologue 6520 bytes
17:53:16| Payload 478225 bytes
17:53:17| This is a CS loader
17:53:17| ***** Loader activation (cmd 01-09)
17:53:17| ***** GDFS activation (cmd 04-05)
17:53:31| ***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
17:53:31| Binary answer is: 04-ff
17:53:31| This loader is LOCKED (errorcode=30)
17:53:31| ***** Auth startup (cmd 05-50)
17:53:31| ***** AuthA (cmd 05-42) hacking
17:53:43| 1000...
17:53:55| 2000...
17:54:06| 3000...
17:54:18| 4000...
17:54:20| ...4201
17:54:20| Matches: 0:0003913, 1:000287, 2:0001, 3:0
17:54:20| Totals : 0:0015741, 1:001060, 2:0003, 3:0
17:54:20| Theory : 0:0015753, 1:001046, 2:0004, 3:0
17:54:20| ***** Reset (cmd 01-0C)
17:54:20| Waiting for the phone to disconnect
17:54:20| Waiting for the phone to reconnect
17:54:23| DBID: 8040 (db2010 Marita compact)
17:54:23| proto: 3.1
17:54:23| ***** sending PRODUCTION_ID_LOADER
17:54:23| sending loaders\db2010_cid00_prodid_p3k.bin
17:54:23| QH00 Header
17:54:23| Wait for EsB
17:54:23| Wait for EhM
17:54:23| QA00 Prologue 6532 bytes
17:54:23| Wait for EaTEbS
17:54:23| QD00 Payload 35540 bytes
17:54:24| Wait for EdQ
17:54:24| This is a PRODUCTION_ID loader
17:54:24| +++ sending CS_LOADER...
17:54:24| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:54:24| Header
17:54:24| Prologue 6520 bytes
17:54:24| Payload 478225 bytes
17:54:26| This is a CS loader
17:54:26| ***** Loader activation (cmd 01-09)
17:54:26| ***** GDFS activation (cmd 04-05)
17:54:39| ***** Read GDFS (cmd 04-01) variable 02-0c8f: phone model (e.g. K750i)
17:54:39| Binary answer is: 04-ff
17:54:39| This loader is LOCKED (errorcode=30)
17:54:39| ***** Auth startup (cmd 05-50)
17:54:39| ***** AuthA (cmd 05-42) hacking
17:54:51| 1000...
17:55:03| 2000...
17:55:16| 3000...
17:55:31| 4000...
17:55:33| ...4201
17:55:33| Matches: 0:0003951, 1:000248, 2:0002, 3:0
17:55:33| Totals : 0:0019692, 1:001308, 2:0005, 3:0
17:55:33| Theory : 0:0019692, 1:001307, 2:0005, 3:0
17:55:33| ***** Reset (cmd 01-0C)
17:55:33| Waiting for the phone to disconnect
17:55:33| Waiting for the phone to reconnect
17:55:37| DBID: 8040 (db2010 Marita compact)
17:55:37| proto: 3.1
17:55:37| ***** sending PRODUCTION_ID_LOADER
17:55:37| sending loaders\db2010_cid00_prodid_p3k.bin
17:55:37| QH00 Header
17:55:37| Wait for EsB
17:55:37| Wait for EhM
17:55:37| QA00 Prologue 6532 bytes
17:55:37| Wait for EaTEbS
17:55:37| QD00 Payload 35540 bytes
17:55:37| Wait for EdQ
17:55:37| This is a PRODUCTION_ID loader
17:55:37| +++ sending CS_LOADER...
17:55:37| binary sending loaders\db2010_cid49red_cs_r5a.bin
17:55:37| Header
17:55:37| Prologue 6520 bytes
17:55:37| Payload 478225 bytes
17:55:39| This is a CS loader
17:55:39| ***** Loader activation (cmd 01-09)
17:55:39| ***** GDFS activation (cmd 04-05)
17:55:43| +++ Sendinging shutdown signal to phone...
17:55:45| Shutting down...
Alguna sugerencia? Gracias...:60:
Re: No puedo borrar /usb/other/gfx
proba con setool2lite, a ver si te lo quita.
Re: No puedo borrar /usb/other/gfx
Pues al ser CID49 creo que la alternativa mas facil y segura es usar el FAR Manger+SEFP, en todo caso tambien es posible borrar la carpeta desde el movil.
Saludos!
Re: No puedo borrar /usb/other/gfx
@LifeHater
Conectalo en modo transferencia de archivos, entra a la memoria interna, y borra el contenido de la carpeta "gfx" dentro de "other" (ejemplo: si la memoria interna es la unidad F:, accesible desde Mi PC, entonces borras la carpeta F:\other\gfx)
Otra opcion, es borrar la carpeta "gfx", dentro de "Otros", desde el administrador de archivos (desde el mismo celular)
Recuerda que /usb, es la memoria interna accesible desde modo transferencia de archivos, no es necesario Far Manager
PD: Qué haces usando Phone XS 2.10 alpha, cuando está disponible el XS++ 2.2? :D (la versión XS++ 2.2 ya no necesita hacer fuerza bruta para entrar a la FS)
Re: No puedo borrar /usb/other/gfx
Gracias m1ch43lzm, tienes mis agradecimientos :), realmente me fue muy util tu solucion :) ahora me quedo exelente. Y pensar que lo mas sencillo es lo mejor.
Una ultima duda, yo mis menus FLASH los paso atraves del FAR manager, pero me a quedado algo podria decirse "inestables" ya que despues de 10 15 minutos de haberle aplicado el SKIN se desconfigura el menu flash y tengo que volver a ponerlo... sera que pasandolo de alguna otra manera se puede corregir esto?
