[AYUDA] Busco firmware K610 R1ED001 RED52

Busco firmware K610 R1ED001 RED52

Buenas,
Estoy tratando de liberar un sony ericsson k610 R1ED001 RED52 de yoigo,
pero por más que he buscado el firmware por internet, todo lo que he encontrado es para RED49 :(

He visto en el foro que hace años, hubieron usuarios que estaban en esta misma situación,
y encontraron solución gracias a vuestra ayuda. Me pregunto si alguien los seguirá teniendo.

Mil gracias si alguien da con ellos y me los pasais, o poneis un link!! ;)

Re: Busco firmware K610 R1ED001 RED52

Downloads - R1ED001_RED52 - Top Sony
Observa si es lo que buscas amigo si no encuentras intenta cambiar de firm!
Saludos!

Re: Busco firmware K610 R1ED001 RED52

Gracias por el aporte!
Pero mi movil es de la marca yoigo. No sé si funcionaría si le pongo de telefónica o vodafone.
Igual acabo antes si cambio de firm. No sabía que se pudiera hacer.

He leído que se hace actualizando el Software con Sony Ericsson Update Service. Lo que sucede es que esto mismo ya lo leí para cambiar de cid 49 a cid 52 (esto ya lo hice con el XS++), no sé si es esto a lo que te referías.
Saludos!

Re: Busco firmware K610 R1ED001 RED52

Ya tengo todo lo necesario: Fs, main y la custom para R1KG001, sólo necesito saber cómo se pasa de R1ED001 a R1KG001 para poder al fin liberarlo. Alguién sabe como puedo hacerlo??

Re: Busco firmware K610 R1ED001 RED52

lea esto:

http://www.topsony.com/forum_es/libe...ta-t60203.html

Re: Busco firmware K610 R1ED001 RED52

Antes de hacer lo que pone en el link que me has pasado, tengo que pasar de 1ED001 a R1KG001, que es lo que me falta saber.
He leído algo al respecto, se ve que hay que hacer un Full Flash Con Farmanager. Lo que estoy buscando es cómo se hace, pero de todos modos gracias.

Re: Busco firmware K610 R1ED001 RED52

Para hacer full flash, Si tu cid es 52 es más fácil con esto:

http://www.topsony.com/forum_es/se-t...-a-t37821.html

Re: Busco firmware K610 R1ED001 RED52

Tengo un problemilla a la hora de liberar. Es el último paso, que se supone tiene que poner "Elapsed:256 secs", a mí solamente me pone 41. Alguien sabe cómo solucionarlo. He rehecho los parches por si fuera ese el problema, pero me sigue sin liberar.

Código:

Welcome to SEtool2 ( LITE edition ) v 1.11 supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 Loaded 51 flash descriptors if you like LITE edition - please visit SETool2 and buy FULL. ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxx CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:2019 Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxx CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:2019 Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:2019 Flash props sent ok writing C:\Documents and Settingsxxx\K610_R1KG001_MAIN_YOIGO_TH_RED52.mbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:9200 Will flash 460 blocks... SSW loading returns:0 Going to execute VKP script.... Starting to process VKP patch script: C:\Documents and Settingsxxx\quick_access_K610_R1KG001.vkp VKP script loaded OK. Lines: 1637 Patch structure created OK. Determining blocks to read... New block #0000 added: $44140000 New block #0001 added: $45B40000 Blocks selected OK. Reading blocks: 2 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written Block 1 written VKP script executed OK Elapsed:1570 secs. Going to execute VKP script.... ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:quick access patch by den_po FLASH CID:52 COLOR:RED OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxx CERT:RED LDR:DB2020 LOADER FOR SETOOL2 Starting to process VKP patch script: C:\Documents and Settings\xxxx\SIMLockPatchGen\vkp\Remove_SIM_lock_K610_R1KG001.vkp VKP script loaded OK. Lines: 6 Patch structure created OK. Determining blocks to read... New block #0000 added: $44700000 Blocks selected OK. Reading blocks: 1 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written VKP script executed OK Elapsed:60 secs. ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxx CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:2019 Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxx CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:2019 Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:2019 Flash props sent ok writing C:\Documents and Settings\xxxx\K610_R1KG001_MAIN_YOIGO_TH_RED52.mbn CURRENT FLASH FILE CID:52 SSW uses complete hash, hash len is:9200 Will flash 460 blocks... SSW loading returns:0 Going to execute VKP script.... Starting to process VKP patch script: C:\Documents and Settings\xxxx\quick_access_K610_R1KG001.vkp VKP script loaded OK. Lines: 1637 Patch structure created OK. Determining blocks to read... New block #0000 added: $44140000 New block #0001 added: $45B40000 Blocks selected OK. Reading blocks: 2 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written Block 1 written VKP script executed OK Elapsed:1532 secs. Going to execute VKP script.... ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:quick access patch by den_po FLASH CID:52 COLOR:RED OTP LOCKED:1 CID:49 PAF:1 IMEI:3538xxxxRT:RED LDR:DB2020 LOADER FOR SETOOL2 Starting to process VKP patch script: C:\Documents and Settings\xxxxvkp\Remove_SIM_lock_K610_R1KG001.vkp VKP script loaded OK. Lines: 6 Patch structure created OK. Determining blocks to read... New block #0000 added: $44700000 Blocks selected OK. Reading blocks: 1 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written VKP script executed OK Elapsed:41 secs.