[RESUELTO] Ayuda W580 muerto

[hotpollo]

Hola a todos, mi problema es que al intentar subir unos acustics con el SEtool empeso a hacer todo esto como si estubiera flasheando el cel, y despues me aparecio esto:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ (http://www.setool.net) and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3551xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:3551xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
CSloader version:
DB2020_FILESYSTEMLOADER_FOR_SETOOL2
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:585 secs.


Ahora mi telefono no prende:a09:, trate de flasear solo el main y esto me aparece:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ (http://www.setool.net) and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:5 secs.


Y este es mi identify:



Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ (http://www.setool.net) and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3551xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:12 secs.



Porfavor alguien que me pueda decir cual es el problema y como resolverlo gracias.

[JKmoran]

flashea el main pero no selecciones ninguna de las casillas de la parte de arriba, solo selecciona modelo y flashea el main

[hotpollo]

Si creo que ese era el problema yo tenia marcada la casilla de Bypass DB 2020 security,
ya pude hacer flash del MAIN y ya prende :a01:, pero se borraron todos mis parches:a33:, gracias.