[RESUELTO] error al meter custom z530

[misa_199]

hola les cuento que el cel lo fhasheo y entra bien el main fs pero al momento de meter el custom nada se queda estatico en el far ia intente tambien meter el custom con setool espero que me puedan ayudar aca les dejo un indentific

11:17:28| XS++ v1.2 Ready !
11:17:32| Attempting to open the interface...
11:17:32| ++++++++++++++++++++++++++++++++++
11:17:32| Turn off phone
11:17:32| Hold C Button on phone and connect phone.
11:17:32| You have 30 seconds.
11:17:32| ++++++++++++++++++++++++++++++++++
11:17:38| PORT STATUS: ACTIVE
11:17:38| Baseband ID: 8040
11:17:38| Hardware Platform: db2010 Marita compact
11:17:38| Protocol Version: 3.1
11:17:38| Sending loaders\db2010_cid00_prodid_p3k.bin...
11:17:38| This is a PRODUCTION_ID loader
11:17:38| Activating GDFS...
11:17:39| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:Z530)
11:17:39| ...using GDFS name
11:17:39| ++++++++++++++++++++++++++++++++++
11:17:39| PHONE INFO
11:17:39| ++++++++++++++++++++++++++++++++++
11:17:39| DBID: db2010
11:17:39| OTP CID: 49
11:17:39| EROM CID: 49
11:17:39| EROM color: Red
11:17:39| IMEI: 35285001xxxxxx
11:17:39| Phone: Z530
11:17:39| Operator: AMERICA_2
11:17:39| CDA: CDA102462/17 R3A
11:17:39| Firmware: R6AC006
11:17:39| EROM: n/a
11:17:39| ++++++++++++++++++++++++++++++++++
11:17:39| Ready for operation!
11:17:50| +++ Sendinging shutdown signal to phone...

[Turbomar]

Intenta con el Xs 3.1 , intenta postear tu log de setool, saludos

[kanongdl]

intenta con otro custom

metelo en miscfiles y dale flash

espero funcione

[misa_199]

intenta con otro custom

metelo en miscfiles y dale flash

espero funcione
amigo ia lo intente con todo pero no accede ala gdfs no agarra el custom saludos...:a43:

[URBANO]

Hola amigo,para solucionar tu problema ,has un flasheo de main en modo de recuperacion (5+2)porque al parecer se a corrompido la gdfs(porque dices que no accede a la gdfs).
luego de eso intanta meter el custom con setool2lite.

saludos.

[misa_199]

Intenta con el Xs 3.1 , intenta postear tu log de setool, saludos
hola amigo pues aca te dejo un indetific del setool

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net (http://www.setool.net) and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35285001195705 CERT:RED
FLASH CID:49 COLOR:RED

Model:Z530i
MAPP CXC article: R6AC001 prgCXC1250454_GENERIC_MU
MAPP CXC version: R6AC001
Language Package:AMERICA_2
CDA article: CDA102462/17
CDA version: R3A
Default article: cxc1250290
Default version: R6AC006

Network LOCKED
Operator: 334-02

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:5 secs.

[URBANO]

Hola amigo, intenta con otra cda o custom porque puede que el tuyo este corrupto o dañado.

saludos.

[misa_199]

hola amigo ia le meti otro custom y me sale esto

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net (http://www.setool.net) and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35285001195705 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Abort all operations.
Elapsed:44 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35285001195705 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
Abort all operations.
verify block error
last blk:44140000,00010000
writing C:\Documents and Settings\Misalchicha\Mis documentos\flasheo de cel en 15 min misa_199\Main y Firm de W300 yW600 y cda z530 y w800\Z530(main,cda y firm)\main orig\Z530_R6DA001_MAIN_GENERIC_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:329
HDR block not accepted,error:BA
Elapsed:48 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35285001195705 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
writing C:\Documents and Settings\Misalchicha\Mis documentos\flasheo de cel en 15 min misa_199\Main y Firm de W300 yW600 y cda z530 y w800\Z530(main,cda y firm)\main orig\Z530_R6DA001_MAIN_GENERIC_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:329
Will flash 329 blocks...
SSW loading returns:0
Elapsed:184 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
PACKAGE CONTAINS SIMLOCKS ! USE WITH CARE !
CDA:CDA102461/107
MODEL:Mulan GEN
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35285001195705 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R6DA001_CXC1250454_GENERIC_MU
Restore from:R6DA001_CXC1250454_GENERIC_MU
CSloader not responding, changing baudrate..
CSloader not responding at all,sorry..
Elapsed:62 secs.

hola amigos no se olviden de mi por fa me urge su opinion.....

[DJ freaks]

hola ¡

mira le encontre tres errores :

-arriba dice error BA , luego verify block error,esto se debe aque no agarra bien tu firm , te recomiendo descarges otro.

- igual checa la ruta del custom tpa/preset/custom/y que lso archivos de adentro concuerden
recuerda el custom va en .zip

- prueba con la version de setool v1..8 la viejita , con la que no puedes parrchar ,

porque al parecer esta tuvo error al ejecutar el CSloader.

saludos y ojala te sirva

[misa_199]

amigos ia lo flashe con la setool box y nada no queda ayuda por fas...

muchas gracias amigo ia pude uff despues de tanto luchar listo gracias saludos...