[RESUELTO] z310 muerto despues de unlock

[christiant]

hola amigos hiceun z310 y despues de liberarlo no prende le hice un identify y marca un error de gdfs aqui se los pongo espero y me puedan ayudar


PHONE IS RED RETAIL PRODUCT
10/07/2008 13:07:41 FLASH CID detected:52
10/07/2008 13:07:41 Speed:921600
10/07/2008 13:07:42 OTP LOCKED:1 CID:51 PAF:1 IMEI:35467001288060 CERT:RED
10/07/2008 13:07:42 LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
10/07/2008 13:07:42 Flash ID check:2019
10/07/2008 13:07:42 Flash props sent ok
10/07/2008 13:07:45 LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
10/07/2008 13:07:45 loader startup: executed
10/07/2008 13:07:45 Loader refused to start GDFS services,error is:29
10/07/2008 13:07:45 loader GDFS startup failed, that is fatal
10/07/2008 13:07:45 Elapsed: 25 secs.
10/07/2008 13:07:57 SIGNED MODE (USING SERVER).
10/07/2008 13:07:57 ALTERNATIVE SECURITY BYPASS ENABLED.
10/07/2008 13:08:26 ChipID:D000,EMP protocol:0301
10/07/2008 13:08:26

[Willin08]

Loader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
(http://www.topsony.com/forum_es/showthread.php?t=71300)

what to do ?

a:
that error can be caused by different problems. lets see all of them

1. user has run "executor" application, which was not deleted after "new altbypass unlock".

solution -
select correct model
on settings check only "use preloader security bypass".
execute any operation, say : "read flash"

2. main software somehow has been damaged (cause of free tools, etc)
solution -
select correct model
on settings check only "use signed mode".
add to firmware area only main part of firmware
press flash (use com/ufs or dcu60 with "2+5" keys if phone not connecting with "C" )
after that, phone should show identify normally.

.... and if not....

3. Repair GDFS

Esto lo dijo the_laser.

[dreechan]

selecciona modelo marca enable preloader y le das unlock, si no prende, carga main marcando signed mode y listo, si na sale asi es gdfs dañada y no hay solucion por el momento, saludos

[cberuti]

Lo hice asi y resulto perfectamente!:a04: