tachid1
28/10/2009, 13:18:20
hola lo que pasa es que intentaba cambiar d firmware a mi w300 ya he hecho0 full flash muchas vecez pero nunca me habia salido esto
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102665/107
MODEL:Jing Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901335663 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\Administrador\Mis documentos\Nueva carpeta\W300_R4EA031_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:161
Will flash 161 blocks...
verify block error
last blk:45B20000,00010000
Elapsed:227 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:39 secs.
y ahora resulta que ya no prende solo parpadea la pantalla en blanco y la pc no lo reconoce que puedo hacer???
de antemano gracias
Cierro tema ya descubri que solo se necesitaba reiniciar la pc disculpen y si desean borren el post XD
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102665/107
MODEL:Jing Generic
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35207901335663 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R9A036_CXC1123260_GENERIC_JE
Restore from:R9A036_CXC1123260_GENERIC_JE
writing C:\Documents and Settings\Administrador\Mis documentos\Nueva carpeta\W300_R4EA031_FS_AMERICA_2_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:161
Will flash 161 blocks...
verify block error
last blk:45B20000,00010000
Elapsed:227 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:39 secs.
y ahora resulta que ya no prende solo parpadea la pantalla en blanco y la pc no lo reconoce que puedo hacer???
de antemano gracias
Cierro tema ya descubri que solo se necesitaba reiniciar la pc disculpen y si desean borren el post XD