So confused; in desperate need of helps

[jasmin]

It works on other A2 phones.

Guide for those who have a branded W910i that the branding blocks the customize_upgrade.xml method:

Step 1: Downloading required stuff
1. Download/extract/install Sony Ericsson Update Service
2. Download/extract KulanKendi Client
3. Download/extract A2 Uploader
4. Download FS - see download area
5. Download MAIN - see download area
6. Download and extract the customization file
7. Run DPInst from the "USBFlash_driver" folder inside A2 Uploader. All drivers is now installed.

Step 2: Debranding the phone
8. Turn off your phone (KulanKendi Client advises Master reset first)
9. Run KulanKendi Client and type anything in the login/password fields.
10. Select the "DB3150(A2)" button (make sure that all boxes is UNTICKED
11. Select the "Open file" button beside "Main" and navigate to the MAIN file you've downloaded above
12. Select the "Open file" button beside "FS" and navigate to File System you downloaded above.
13. Select the "Flash Phone" button.
14. Hold the "C" button and plug your USB cable into your PC and then your Phone.
15. "MAIN" file will be flashed (will take 3.5 minutes).
16. "FS will be flashed" (will take 2.5 minutes).
17. It will say "connecting" or something similar then it will say "unable to connect" or something. This is OK.
18. Close KulanKendi client, let go of the "C" button and unplug the phone.
19. Run A2 Uploader.
20. Click on "File System Tool", and hold the "2" and "5" buttons then plug USB cable into the phone.
21. Once the file system on the right has appeared, let go of the buttons and navigate to tpa\preset\custom and then drag "customize.xml" onto the file system window. This takes a second or two, when it's done, stop the file system tool (by clicking on "Shutdown FS Manager"), then quit the application.
22. Turn on your UNBRANDED and "new" phone.

Have a nice day

[conan1510]

thank you, but still which version of MAIN should I use (there are 4)

[erkhson]

It works on other A2 phones.

Guide for those who have a branded W910i that the branding blocks the customize_upgrade.xml method:

Step 1: Downloading required stuff
1. Download/extract/install Sony Ericsson Update Service
2. Download/extract KulanKendi Client
3. Download/extract A2 Uploader
4. Download FS - see download area
5. Download MAIN - see download area
6. Download and extract the customization file
7. Run DPInst from the "USBFlash_driver" folder inside A2 Uploader. All drivers is now installed.

Step 2: Debranding the phone
8. Turn off your phone (KulanKendi Client advises Master reset first)
9. Run KulanKendi Client and type anything in the login/password fields.
10. Select the "DB3150(A2)" button (make sure that all boxes is UNTICKED
11. Select the "Open file" button beside "Main" and navigate to the MAIN file you've downloaded above
12. Select the "Open file" button beside "FS" and navigate to File System you downloaded above.
13. Select the "Flash Phone" button.
14. Hold the "C" button and plug your USB cable into your PC and then your Phone.
15. "MAIN" file will be flashed (will take 3.5 minutes).
16. "FS will be flashed" (will take 2.5 minutes).
17. It will say "connecting" or something similar then it will say "unable to connect" or something. This is OK.
18. Close KulanKendi client, let go of the "C" button and unplug the phone.
19. Run A2 Uploader.
20. Click on "File System Tool", and hold the "2" and "5" buttons then plug USB cable into the phone.
21. Once the file system on the right has appeared, let go of the buttons and navigate to tpa\preset\custom and then drag "customize.xml" onto the file system window. This takes a second or two, when it's done, stop the file system tool (by clicking on "Shutdown FS Manager"), then quit the application.
22. Turn on your UNBRANDED and "new" phone.

Have a nice day

thanks for the tutor
may i save this tutor