Flashing With Setool Lite 11

[rudie]

How long does it takes to flash the main, FS and Custom pact with Setool Lite? I am trying to flashing my W580 in order to unlock it but setool has be going for over an hour. I stopped it and the phone died; luckly I had backed up the GDFS and was able to flash it back with XS++ and the phone came back to life. I started the flashing process again but it has been going for over an hour. Is this normal? Also, is the custom pack supposed to be flashed as a zipped file. When I extract it there are alot of files in that pack?

Thanks for any help.

Guys, I could really use all your help with this issue. I stopped the process again and restore the GDFS again but now the phone starts up really slow. So I download an GDFS online and flash it to the phone, now the phon will not turn on and the C button only blinks. Now I cannot connect to anything, it's telling me cannot connect to phone communication port. What am I doing wrong? This how I am trying to flash the phone, I connet the phone to setool lite add the Main, FS and Custom Pack and click flash but setool just sits there for hours. Please help me!!!!


I have been editing my post for the past two hours becuase I do not want to double but I really could use some help. I cannot get the phoe to connect to anything. Please, Please!!!!

[jasmin]

It`s takes about 15-20 Minutes.
Take out battery and insert it and tried again.

USB Flash Driver Installation - Guide

Connect your phone to xs++ and copy here your phones log.

XS++ 3.1 Guide-Flashing,Customizing,Recovering

Flashing a GDFS that did not originally come from that exact handset may have severe consequences, maybe you have bricked your phone.

We will see, when you post your phones log.

Nice day

[rudie]

Thanks Jasmin, the phone will not connect to XS++ but I was able to connect it to Setool using this repair EROM guide I found online.

1. Start SeTool 2 lite
2. Press Unlock\Repair Button, The first button.
3. Reinsert Battery
4. Connect phone holding 2+5
5. Wait, SeTool 2 lite will repair the EROM, it will flash it back.
6. Done

This is the only way I can get me phone to connect. Here is the log, hope the phone is not complete dead. One thing the phone original software version is R7AC001.

Thanks again.



Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:77 secs.

[jasmin]

You should restore your GDFS. How much I notice you did backup your GDFS.

Nice day

[rudie]

You should restore your GDFS. How much I notice you did backup your GDFS.

Nice day

This what I am trying to do but I cannot get the phone to connect to XS++. I alway get this error trying to connect.

06:10:18| XS++ v3.1 (Darwin) Ready !
06:10:18| Executed on Microsoft Windows XP
06:10:23|
06:10:23| Attempting to open the interface...
06:10:23|
06:10:23| TURN OFF PHONE!
06:10:23| Hold 'C' button on phone and connect phone NOW.
06:10:23| You have 30 seconds...
06:10:23|
06:10:55| Error: Cannot open phone communication port
06:10:57| Disconnected... Unplug the phone

And I can only connect to setool Lite by pressing the unlock/repair button and pressing 2+5 on the phone but when I try to restore the backup that I made from XS++, setool lite shows it is working but it is actually not doing anything. Is there another way I can connect the phone to XS++ because this software seems to be the only way I can restore the Backup GDFS?

Thanks.

[jasmin]

Look here:

How to solve "Error: Cannot open phone communication port" problem.

Nice day

[rudie]

Jasmin thanks alot for all your help. I have tried the process in the link but I still wasn't able to get the phone connected. I think I just going accept the fact that the phone will not come back to life. Anyway, thanks again for your help:)