I was trying to upgrade my camera driver to Professional Camera Driver. I used XS++

Here are my phone's specifications:
:
18:02:45| DBID: db2010
18:02:45| OTP CID: 49
18:02:45| EROM CID: 49
18:02:45| EROM color: Red
18:02:45| IMEI: 35785000xxxxxx
18:02:45| Phone: K750
18:02:45| Operator: EMEA_6
18:02:45| CDA: CDA102337/103 R3A
18:02:45| Firmware: R1DB001
18:02:45| EROM: n/a

Here is the process log:

18:02:45| Ready for operation!
18:02:52| +++ Flashing breakin...
18:02:52| Sending loaders\db2010_cid49red_flash_r2a003.bin...
18:02:52| This is a FLASH loader
18:02:52| Sending flashfile loaders\jhf02.bin
18:02:52| 1 flashblocks
18:02:53| Done flashing
18:02:53| ++++++++++++++++++++++++++++++++++
18:02:53| Disconnect phone from USB-port and wait for
18:02:53| further instructions.
18:02:53| You have 8 seconds.
18:02:53| ++++++++++++++++++++++++++++++++++
18:03:01| Open the battery-cover and reinsert the battery.
18:03:01| Hold C Button on phone and connect phone again.
18:03:01| You have 30 seconds.
18:03:01| ++++++++++++++++++++++++++++++++++
18:03:08| Baseband ID: 8040
18:03:08| Hardware Platform: db2010 Marita compact
18:03:08| Protocol Version: 3.1
18:03:08| +++ Phone has restarted successfully...
18:03:08| This is an unknown loader type
18:03:08| Sending loaders\db2010_cid00_hack_cs_v23.bin...
18:03:13| This is a CHIPSELECT loader
18:03:13| Activating loader...
18:03:13| Activating GDFS...
18:03:13| Checking if loader is unlocked...
18:03:13| This loader is UNLOCKED
18:03:13| Sucess! CS-loader has been unlocked!
18:03:13| +++ Deleting files...
18:03:13| +++ Uploading /files_to_upload to phone...
18:03:13| Upload ./files_to_upload/TPA/IFS/SETTINGS/CAMERA/camdriver0.dat to TPA/IFS/SETTINGS/CAMERA/camdriver0.dat
18:03:13| Activating FS...
18:04:13| Make directory (cmd 03-07) TPA
18:04:13| Make directory (cmd 03-07) TPA/IFS
18:04:13| Make directory (cmd 03-07) TPA/IFS/SETTINGS
18:04:13| Make directory (cmd 03-07) TPA/IFS/SETTINGS/CAMERA
18:04:13| Delete file (cmd 03-04) TPA/IFS/SETTINGS/CAMERA/camdriver0.dat
18:04:13| Upload file (cmd 03-0C) TPA/IFS/SETTINGS/CAMERA/camdriver0.dat
18:04:13| Done uploading
18:04:13| ++ Sending shutdown command to phone...
18:04:13| ++ Customizing was SUCCESSFUL!
18:04:13| ++++++++++++++++++++++++++++++++++
18:04:13| Disconnect phone from USB-port and wait for
18:04:13| further instructions.
18:04:13| You have 8 seconds.
18:04:13| ++++++++++++++++++++++++++++++++++
18:04:21| Open the battery-cover and reinsert the battery.
18:04:21| Hold C Button on phone and connect phone again.
18:04:21| You have 30 seconds.
18:04:21| ++++++++++++++++++++++++++++++++++
18:04:29| Baseband ID: 8040
18:04:29| Hardware Platform: db2010 Marita compact
18:04:29| Protocol Version: 3.1
18:04:29| +++ Phone has restarted successfully...
18:04:29| Sending loaders\db2010_cid49red_flash_r2a003.bin...
18:04:29| This is a FLASH loader
18:04:29| Cannot open breakinfirm\K750_R1DB001.bin
18:04:29| Your firmware doesn't exists in our library.You'll need to reflash your mainfirmware.Done flashing
18:04:29| ++ Disconnecting phone...
18:04:29| ++ You may now unplug your phone.
18:04:29| ++ FSX was successful
18:04:31| Disconnected... Unplug the phone
18:04:35| Shutting down...

My phone is not turning on, what should I do?
I tried SEUS but that reverted my Camera driver to Original driver, and the phone turns on.