Dead W610i, need help...

[Norshius]

Hello,
My W610i just don't turn on! I've tried everything: charging, taking out SIM, battery, even reinstalling firmware, but nothing helped. I've heard about EROM upgrading, but at the moment i'm afraid to lose the phone completely, if something goes wrong with EROM. Could anybody tell me, what is the risk, when the upgarding of EROM fails. I mean, if installation goes wrong or something. Will the phone become unrepairable?
Sorry for bad english ;-)

[jasmin]

Look you should connect your phone to xs++ or setool lite and copy here your phones log ( without Imei number ).

In worst case yes it become unrepairable with free tools.

Nice day

[Norshius]

Ok, i'll post them as soon as possible (at the moment i don't have an usb cable).

[johnys192]

If everything fails then you should go to the sony ericsson service center if u still have guarantee.

[benny888]

hardware broken ?? as u said u hv reflashed the firmware?

[Norshius]

Here are my w610 logs:

11:58:26| Baseband ID: 9900

11:58:26| Protocol Version: 3.1

11:58:26| Warning: IMEI name does not match GDFS name (IMEI:Z520 GDFS:W610)

11:58:26| ...using IMEI name

11:58:26|

11:58:26| Profiling SEMC phone...

11:58:26| Platform: DB2020

11:58:26| OTP CID: 51

11:58:26| EROM CID: 52

11:58:26| EROM Color: Red

11:58:26| IMEI: 35715401xxxxxx

11:58:26| Phone ID: Z520

11:58:26| Region: BALTIC

11:58:26| CDA: CDA102568/1 R3A

11:58:26| Firmware Version: R6BC002

11:58:26| EROM: R3A022

11:58:26| Ready for operation!

I've been to mobile phone service and they have only flashed firmware, but it haven't helped.
Please note, that my XS++ 3.1 don't read correctly firmware's version!
I've flashed firmware once more to R8BA024 and EROM to R3B025, but program shows firmware version, flashed by phone service and EROM version, which was before my EROM flash.

Here's whole story of my phone crash:
1. It worked perfectly for ~two months after flash, that i made to debrand my phone.
2. One morning it just turned off. When i was trying to turn it up screen went white, but after a several times it turned up and showed "Network error", "Can't find network" or something like that (i don't remember exactly). Then the screen went white again and phone turned off.
3. When trying to turn it up, sometimes the screen blinked white one time and vibro started for a second (usual when my phone boots) or red light near IR port fashed for several times. It blinked 6 times and i found out, that it probably means EROM problem.
4. I've flashed EROM, but the only thing that changed, is that IR light now blinks 9 times.

Please note, that i kept my phone carefully, it hasn't fallen or been wet. If it is a hardware problem, i can't imagine, how it developed.

[Norshius]

Emmm... I've used Setool lite 1.11 Unlock/repair function and now my phone works!!!
I can't believe it!!!

[albo6]

Use Kulan Kendi Client to Repair!!!
http://www.topsony.com/forum/showthread.php?t=6462

[kadeep]

my w610 gone forever after i just flash and flash with fun