K810i After patch, nothing happen.

[devalian]

i have these files:
K810_R8BA024_MAIN_CHINA_SM_RED52.mbn
quick_access_K810_R8BA024.vkp (make by qamaker with above mbn file)

first, i flash my phone with this mbn without FS file. then in MISC use this quick acces VKP. tick Bypass DB2020 security oledi. then after Finish flash (clicked no to apply patch, n yes to continue patch with different value).

then after that, i try to start phone. everything works fine..
i go http://www.topsony.com/forum/showpos...2&postcount=17 to download da VKP patch. i copy n paste into notepad even saved as walkman.vkp.

then open SEtool tick quick access, in MISC use da file i made. then write script. i done this so many times, keep restarts my phone. not even 1 patch change anything in my phone.

i applied walkman interface, start phone. nothing happen.
apply megabass, start phone, nothing happen.
radio without headset, no.

i tried so many type of VKP from the website. all success patch, but no 1 could work.. why?

could anyone please tell me?

[devalian]

flash process and then write walkman player script....

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101679978 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101679978 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Users\DeVaL!aN\Desktop\bitcomet\XS++3.2\setool1 1\qamaker\K810_R8BA024_MAIN_CHINA_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\DeVaL!aN\Desktop\bitcomet\XS++3.2\setool1 1\quick access\quick_access_K810_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:829 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101679978 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Users\DeVaL!aN\Desktop\bitcomet\XS++3.2\setool1 1\MISC edit\radio without headset.vkp
VKP script loaded OK. Lines: 506
Line #3: (C) KONRADO (CENTRUMSE.PL) - ignored. No ":"
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45980000
New block #0001 added: $45940000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:50 secs.

[senter]

@devalian you must use Main Generic.

[mohdumer]

The Problem Lies Here:

Flash ID check:2019
Flash props sent ok
writing C:\Users\DeVaL!aN\Desktop\bitcomet\XS++3.2\setool1 1\qamaker\K810_R8BA024_MAIN_CHINA_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0

You'll Have To Use MAIN GENERIC.

[devalian]

bro, mean now im using China firmware. if i flash main generic firmware will not brick my phone right?

BTW, main generic got chinese?

[mumum_08]

bro, mean now im using China firmware. if i flash main generic firmware will not brick my phone right?

BTW, main generic got chinese?

Same thing happened to me.. i have china too and tried patching it with china main and nothing happened. but when i used generic it worked. and i also searched they said i should use generic. try it man...

[devalian]

im flashing main generic now.. then do ur main_generic have chinese?? chinese is must for me oo..

[devalian]

help help

after flash main_generic firmware... my phone shoed "Configuration error. Please contact your network operator or senvice centre." why like this??

i oledi unlock/repair using SEtool...

[mumum_08]

Hmm i dont know.. maybe ur phone is branded or locked? not quite sure mine went just fine when i used generic

[akshayy]

hey after db2020 bypass you need to apply quick access patch ... then go ahead with others !

google search for better guides ! you should find !