customizing region

[JPH]

In xs++, you have to customize your fs. I've downloaded w800 EMEA_6 firmware for my k750, could I set region to EUROPE_3 when customizing?

[ama95]

i think not, download custpack from iprotebe.cz you need to register but it's free

[Beep88]

EMEA_6 = English - French - Arabic - Persian-Farsi - Russian

EUROPE_3 = English - Danish - Dutch - French - German

Hardly a good match.

[JPH]

What will happen when I do? Will it brick my phone?

[jasmin]

Look at this example :

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

Nice day

[JPH]

Thanks all, I should just download the EUROPE_3 firmware. Cuz I don't want to brick my phone. But that firmware is very hard to find! Only on topsony. So I will wait for 2 months.:D

[Beep88]

It will not brick your phone, if you have the wrong custpack. It may work OK, if you are lucky, and especially if they are both European regioned. Also I bet the generic EMEA6 and EUROPE3 custpacks are pretty much identical, except for the language tags in customize.xml

i.e. if you try to use Arabic Persian-Farsi Russian Danish Dutch you would cause error.

[JPH]

It may work OK, if you are lucky, and especially if they are both European regioned

It sounds like a risk, but when I use europe_1 firmware with europe_3 custpack, It should go fine?

[mohdumer]

In xs++, you have to customize your fs. I've downloaded w800 EMEA_6 firmware for my k750, could I set region to EUROPE_3 when customizing?

It sounds like a risk, but when I use europe_1 firmware with europe_3 custpack, It should go fine?

It Works And It Always Works.:D The Most It Can Do (Although Never Happened With Me) Is Stop Your Phone From Catching Signals. Then What You'll Have To Do Is Use Another CustPack Only.:)

[JPH]

I use EMEA_6 firmware now, and I have no problems with signal, although I live in EUROPE_3 region.

Maybe I will try installing a custpack. But I think I will just flash my phone with the right firmware.;)