Help me unlock my W810i...very sticky

[penkus]

Hi guys, this is my first query on this forum and first trial with unlocking. I give every detail i can think of.

After going thru this forums I downloaded SEtool 1.8 and tried to unlock my W810i on R4EA031 firmware and i got it identified using the tool. But while I try unlock it just gets into 'READY' mode exactly at the same stage where it identified.

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401058695 CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_2
CDA article: CDA102494/145
CDA version: R3A
Default article: cxc1250324
Default version: R4ED001

Network LOCKED
Operator: 234-10

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
Elapsed:7 secs.


Iam not able to unlock it hence. I tried many times but the result is same.
Please help me ... many thanks in advance

[simox]

First check these threads:
General Information about Patch-Unlocking (start here if you want to unlock)

and

Remove SIM-lock patch generator

[ts014]

the unlock button on setool2 lite does not work as it's only a lite version you need to unlock your phone with a patch.

[penkus]

Thanks for tha... So

1. Get the firmware
2. Generate Patch with Simox tool
3. Patch on the phone
4. Then use ssetool to unlock it ?

Am i gettin it correctly...

[jasmin]

Yes.

Flash your phone and How to apply or remove patch using SETool 2 Lite

All other links did wrote simox, that you will need.

Nice day

[penkus]

I have followed steps for Flashing + Patching and then tried to unlock it But it stayed there as in the beginning -

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401058695 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
Starting to process VKP patch script: F:\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\Remove _SIM_lock_W810_R4EA031.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E40000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
block already patched, skipping.
VKP script executed OK
Elapsed:111 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401058695 CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:EUROPE_2
CDA article: CDA102494/145
CDA version: R3A
Default article: cxc1250324
Default version: R4EA031

Network LOCKED
Operator: 234-10

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:6 secs.
Elapsed:6 secs.

I have used - W810_R4EA031_FS_EUROPE_2_RED49.fbn ; W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn but Main and FS as it matches the firmware.

tried for over 6 hours now....Please help in resolving this...