What if i Flash Main and FS without backing up my GDFS?? is it dangerous to do so?? i ask so because my GDFS cannot be backed up :(
What if i Flash Main and FS without backing up my GDFS?? is it dangerous to do so?? i ask so because my GDFS cannot be backed up :(
you can stop your phone from working, so...
why your gdfs can nont be backed up?
never heard this before
Because it sounds that its EROM has been damaged as my set doesnt switch on,,, only red light blinks...
when i apply the Read GDFS command in setool lite, i meet with this log...
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35***********4 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
ldr_on_ldr hdr no ack (10)
CSloader uploading failed,exiting
Elapsed:4 secs.
you need other batery o To recharge, then reflash only the main, ONLY MAIN
can i recharge my current battery in this condition?? And will, just flashing the Main, repair the damaged EROM???
Last edited by hot_spark; 03-11-2008 at 02:54 AM.
Try the easy method update with seus.After that reflash your phone.Good luck!
I've used that but when i connect my phone and phone detection process starts, i hear a hardware detaching sound and the SEUS says "Identification Failed". i've tried it several times but in vain :( . any other ideas??
There are currently 1 users browsing this thread. (0 members and 1 guests)