Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 86
  1. #31
    ADDIER
    Guest

    re: Setool Box Updates

    How to service db2010/db2020/pnx5230 cid52/cid53 using new setool2 (>=v0.914029) alternative bypass method ?
    what problems i can meet and how to resolved them ?
    what precautions should i follow ?

    a:

    terms:
    phone should work fine.
    red blink, white blink, etc phones are NOT supported.

    you can only use alternative bypass if your phone has supported firmware (you have BOTH rest file and bypass package)
    if yours firmware not supported, either flash supported firmware (only main part in enough) or post request on forum.

    BEFORE using new alternative bypass method you SHOULD turn phone on and install CSCA(MODEM) drivers.

    i STRONGLY recommending to browse that FAQ and READ article about com-ports growth - there is EXTREMLY helpful file,which
    prevents discovering of same phone models as new devices.

    if you are capable user, you can edit .inf files of CSCA(MODEM) drivers - we only need to install
    Sony Ericsson Device XXX bus driver and Sony Ericsson Device xxx USB WMC Modem - all other devices is not needed.
    that will help you to save comport numbers.

    important! if your phone had unsupported firmware and you flashed main part (all parts) of supported - you MUST power on phone, so phone will update new firmware info.

    because of way new alternative bypass method works, you need
    TEST SIM card (mcc/mnc 00101) or OPERATOR SIM card. (you must be able browse phone menu,etc)

    supported following models:

    db2012 cid52 - normal CID52 phones (w200,w300), abnormal CID52 phones (k310,k510,w810,z550)
    db2020 cid52/cid53 phones
    pnx5230 cid52/cid53 phones

    supported operations:
    unlock via patch, all additional things that setool2 can provide.

    YOU AGAIN NEED REST FILES !!!! FOR ALL MODELS, WHICH ARE SUPPORTED FOR ALTBYPASS !!!
    GET THEM FROM SUPPORT SITE OR DO IT YOURSELF

    Procedure of new alternative security bypass :

    1. select correct phone model
    2. go to settings tab,
    3. check BOTH "signed mode (using server)", "enable alternative security bypass", that is required
    4. optionally, check "unlock after flash", "patch otp<>gdfs check in firmware"+"allow to change IMEI when unlocking" (read precautions)
    5. optionally, check "complete phone after flash" (i recommend use custpacks)
    6. go back to semc tab
    7. if you need, add main+fsimage+custpack (script)
    8. press desired operation
    9. when asked, disconnect phone, insert TEST SIM, power on phone fully and connect it.
    10. HOLD "C" (or "2" for w880/simular) BUTTON ALL THE TIME UNTIL PHONE REBOOTS.
    11. when asked, disconnect phone, remove battery, insert battery, then connect phone while holding corresponding button ('C' or '2' for w880). In 99% cases phone will reboot and connects automatically.

    approximate time for unlock by patch using new alternative bypass method is 160-180 seconds on one phone.

    precautions:
    please take care that there is NO (at least, i can't get) cid52 firmwares for following db2010 phones: k310,k510,w810,z530,z550

    luckily, k310,k510 can be flashed with w200 firmware, so we can always return them to original state.

    but it is NOT related to w810,z530,z550 phones.
    cause there is no firmwares, we can't recover them in case of error.

    because of that, one mistake with that phones - and you get deadweight.
    you have been warned.

    under mistake i mean:
    - terminated flash or anything,which prevents phone from starting up
    - changed IMEI of phone, which prevents phone from using new alternative bypass method.

    will repeat again:

    DO NOT WRITE FOREIGN IMEI IF YOU NOT HAVE BACKUP IN DB2010 CID50/51/52/53 , DB2020 CID49/51/52/53, PNX5230 CID49/CID51/CID52/CID53 PHONE

    THINK 10 TIMES BEFORE CHANGE IMEI IN W810/Z530/Z550 CID 52 PHONES
    DO NOT EVEN THINK TO MESS UP FIRMWARE IN W810/Z530/Z550 CID52 PHONES

    possible problems:

    in case of terminated flash/etc you can always return phone to life by flashing any original firmwares into them -
    and then it ready for execution again

    short info of firmwares we have and have not:

    db2012 k310 (via w200),k510 (via w200) ,w200,w300 - CID52 firmwares available.
    db201x abnormal CID52 phones Z530,Z550,W810 - NO CID52 firmwares.
    db2020 - supported CID52/CID53 firmwares available
    pnx5230 - supported CID52/CID53 firmwares available

    on "step 11" phone not connecting, but simple turning on

    due delicate bypass process such thing is possible, but that happens VERY-VERY rare.
    nothing weird happens in that case - you have 4 choices what do :

    1. terminate process (press stop) and retry from beginning.
    2. as phone powered on now, go to menu->games and run program called "executor". phone should "turn off",sometimes with white screen,sometimes not. Continue procedure then (step 11)
    3. if you run "executor",but pressed stop - go to settings, check "enable preloader security bypass" - now you can do any operation with phone, like unlock/etc.
    4. reflash phone in "signed mode" and start from step 1. (idiotic, isn't it ? )

    on step 11 setool2 stucks in loop with message "PHONE NOT READY YET", but phone is turned on okay

    well, better ask semc programmers why that happens... anyway - to solve that -
    just press "STOP" ONCE - setool2 will continue procedure.

    on step 11 i got message "CAN'T START EXECUTOR,RETRYING..."

    it is okay to have that message if phone not in "normal mode" or starting up. just switch phone to normal mode and wait.


    following firmwares are supported:

    W880

    R1JC002_CXC1250640_GENERIC_AI
    R1KC001_CXC1250640_GENERIC_AI
    R1KG001_CXC1250640_GENERIC_AI
    R6BC002_CXC1250640_GENERIC_AI
    R8BA024_CXC1250640_GENERIC_AI
    R8BC004_CXC1250640_GENERIC_AI
    R8BE001_CXC1250640_GENERIC_AI

    Z310
    R1JC002_CXC1250594_GENERIC_AL
    R1KF001_CXC1250594_GENERIC_AL
    R6BC002_CXC1250594_GENERIC_AL
    R8BA024_CXC1250594_GENERIC_AL
    R8BA024_CXC1250790_VODAFONE_AL

    W710
    R1EE001_CXC1250433_GENERIC_CH
    R1GB001_CXC1250433_GENERIC_CH
    R1JC002_CXC1250433_GENERIC_CH

    Z710
    R1EF001_CXC1250434_GENERIC_CN
    R1JC002_CXC1250434_GENERIC_CN

    K510
    R4EA031_CXC1250231_GENERIC_CO
    R4GC010_CXC1250231_GENERIC_CO

    W850
    R1ED001_CXC1250200_GENERIC_CY
    R1GB001_CXC1250200_GENERIC_CY
    R1JC002_CXC1250200_GENERIC_CY
    R1JG001_CXC1250200_GENERIC_CY
    R1KC001_CXC1250200_GENERIC_CY
    R1KG001_CXC1250200_GENERIC_CY

    K310
    R4DA044_CXC1250466_GENERIC_DO
    R4EA031_CXC1250466_GENERIC_DO
    R4GC010_CXC1250466_GENERIC_DO
    r4da044_CXC1250472_ORANGE_DO

    W830
    R1JC002_CXC1250705_GENERIC_EA
    R1JC002_CXC1250713_CMCC_EA
    R1KG001_CXC1250705_GENERIC_EA
    R1KG001_CXC1250710_CHINA_EA

    K790
    R1CC003_CXC1250477_DEV_EV
    R1EG001_CXC1250477_GENERIC_EV
    R1GB001_CXC1250477_GENERIC_EV
    R1JC002_CXC1250477_GENERIC_EV
    R1JG001_CXC1250477_GENERIC_EV
    R1KC001_CXC1250477_GENERIC_EV
    R1KG001_CXC1250477_GENERIC_EV
    R8BC004_CXC1250477_GENERIC_EV
    R8BF003_CXC1250477_GENERIC_EV

    W660
    R6AD001_CXC1250446_GENERIC_FY
    R6BC002_CXC1250446_GENERIC_FY
    R8BB001_CXC1250446_GENERIC_FY
    R8BE001_CXC1250446_GENERIC_FY

    W810
    R4CE012_CXC1250316_GENERIC_HN
    R4CK003_CXC1250316_GENERIC_HN
    R4EA031_CXC1250316_GENERIC_HN
    R4GC010_CXC1250316_GENERIC_HN
    r4db005_CXC1250316_GENERIC_HN

    W300
    R4EA031_CXC1123260_GENERIC_JE
    R4GG001_CXC1123260_GENERIC_JE
    R9A031_CXC1123260_GENERIC_JE
    R9A035_CXC1123260_GENERIC_JE
    R9A036_CXC1123260_GENERIC_JE

    W350
    R10BA015_1204-3117_GENERIC_JH

    W580
    R6BC002_CXC1123362_GENERIC_LA
    R8BA024_CXC1123362_GENERIC_LA
    R8BE001_CXC1123362_GENERIC_LA

    W380
    R10BA015_1201-4421_GENERIC_LE
    R9BA023_1201-4421_GENERIC_LE
    R9BB001_1201-4421_GENERIC_LE

    K550
    R1JD001_CXC1250669_GENERIC_LI
    R1KC001_CXC1250669_GENERIC_LI
    R1KG001_CXC1250669_GENERIC_LI
    R6BC002_CXC1250669_GENERIC_LI
    R8BA024_CXC1250669_GENERIC_LI

    S500
    R6AC003_CXC1123326_GENERIC_LY
    R6BC002_CXC1123326_GENERIC_LY
    R6BC002_CXC1123460_CHINA_LY
    R8BA024_CXC1123326_GENERIC_LY
    R8BE001_CXC1123326_GENERIC_LY

    W200
    R4GB001_CXC1250719_GENERIC_ME
    R4GC012_CXC1250719_GENERIC_ME
    R4GH001_CXC1250719_GENERIC_ME
    R4HA014_CXC1250719_GENERIC_ME
    R4JA011_CXC1250719_GENERIC_ME

    Z555
    R9BB001_1202-6764_GENERIC_MG
    R10BA015_1202-6764_GENERIC_MG
    R9BA023_1202-6764_GENERIC_MG

    Z550
    R6BA033_CXC1250583_GENERIC_ML
    R6CA009_CXC1250583_GENERIC_ML
    R6GA004_CXC1250583_GENERIC_ML

    Z530
    R6DA001_CXC1250454_GENERIC_MU
    r6ac001_CXC1250454_GENERIC_MU
    r6ba030_CXC1250454_GENERIC_MU

    V630/K618
    R1JC002_CXC1250556_VODAFONE_MW
    R1JE001_CXC1250556_VODAFONE_MW

    Z610
    R1ED001_CXC1250546_GENERIC_MY
    R1EJ001_CXC1250546_GENERIC_MY
    R1GB001_CXC1250546_GENERIC_MY
    R1JC002_CXC1250546_GENERIC_MY
    R1JG001_CXC1250546_GENERIC_MY
    R1KH001_CXC1250546_GENERIC_MY

    W610
    R1JD001_CXC1250747_GENERIC_NA
    R1JE001_CXC1250747_GENERIC_NA
    R1KC001_CXC1250747_GENERIC_NA
    R1KG001_CXC1250747_GENERIC_NA
    R6BC002_CXC1250747_GENERIC_NA
    R8BA024_CXC1250747_GENERIC_NA

    K530
    R6BC002_CXC1250912_GENERIC_NC
    R8BB001_CXC1250912_GENERIC_NC
    R8BE001_CXC1250912_GENERIC_NC

    K810
    R1KC001_CXC1250811_GENERIC_SM
    R1KG001_CXC1250811_GENERIC_SM
    R6BC002_CXC1250811_GENERIC_SM
    R8BA024_CXC1250811_GENERIC_SM
    R8BE001_CXC1250811_GENERIC_SM
    R8BF003_CXC1250811_GENERIC_SM

    T650
    R8BB001_1200-2562_GENERIC_SN
    R8BC004_1200-2562_GENERIC_SN
    R8BE001_1200-2562_GENERIC_SN

    K610
    R1ED001_CXC1250374_GENERIC_TH
    R1GB001_CXC1250374_GENERIC_TH
    R1JC002_CXC1250374_GENERIC_TH
    R1JG001_CXC1250374_GENERIC_TH
    R1KC001_CXC1250374_GENERIC_TH
    R1KG001_CXC1250374_GENERIC_TH
    R8BA024_CXC1250374_GENERIC_TH

    K770
    R8BA024_1201-7587_GENERIC_VI
    R8BC004_1201-7587_GENERIC_VI
    R8BE001_1201-7587_GENERIC_VI

    K800
    R1ED001_CXC1250210_GENERIC_WI
    R1GB001_CXC1250214_CHINA_WI
    R1JC002_CXC1250210_GENERIC_WI
    R1JG001_CXC1250210_GENERIC_WI
    R1KC001_CXC1250210_GENERIC_WI
    R1KG001_CXC1250210_GENERIC_WI
    R8BA024_CXC1250210_GENERIC_WI
    R8BC004_CXC1250210_GENERIC_WI
    R8BF003_CXC1250210_GENERIC_WI

  2. #32
    ADDIER
    Guest

    re: Setool Box Updates

    v0.914030

    - "complete after flash" was broken when using new
    "alternative security bypass" mode. fixed
    - "use preloader bypass mode" not allowed
    "unlock" operations. fixed
    - memory overrun was present, which sometimes
    prevents phones from booting. fixed.

    v0.914029_to_v0.914030

  3. #33
    ADDIER
    Guest

    re: Setool Box Updates

    v0.914031

    - by request added pause after preparation part of new altbypass method.
    please check FAQ for change in procedure.

    - added possibility to create restoration files automatically.
    for that, identify phone to find out what firmware inside.
    then, add that firmware to firmware area and identify phone AGAIN.
    rest file will be created if firmware is okay.

    - added all latest BYPASS PACKAGES

    RapidShare link for v0.914029_to_v0.914031.exe

  4. #34
    ADDIER
    Guest

    re: Setool Box Updates

    WARNING. WARNING. WARNING

    if you ever downloaded *lastest* rest files from following links:


    Code:
    ---------
    FileFactory.com - free file hosting
    FileFactory.com - free file hosting
    FileFactory.com - free file hosting
    FileFactory.com - free file hosting
    FileFactory.com - free file hosting
    ---------
    please note, made *incorrect* files for following phone models:

    k750,w700,k600,w900,w550,w600,*w350,w380,z310*
    you *will lose logs and produce "dead" phones (need reflash)* if will use that files.

    you will see next error message (names can vary)


    Code:
    ---------
    Restore from:R1JC002_CXC1250594_GENERIC_AL
    verify block error
    last blk:44140000,00010000
    gdfsWrite no ACK
    Unlock FAILED
    ---------
    * ORIGINAL SETOOL2 REST FILES ON SUPPORT ARE OKAY*

    * PLEASE, DELETE INCORRECT REST FILES (EXTRACT ATTACHED SCRIPT, PUT IT IN SETOOL2 DIRECTORY AND RUN)

    AND USE ORIGINAL FILES FROM SETOOL2 SUPPORT OR USE AUTOMATIC RESTORE FILE CREATION FEATURE OF 031 VERSION.
    *
    ***************

  5. #35
    ADDIER
    Guest

    re: Setool Box Updates

    v0.914032

    - not important bugfixes, just merged latest fixes in different modules.

    v0.914029_to_v0.914032

  6. #36
    ADDIER
    Guest

    re: Setool Box Updates

    *v0.914033*

    - added *FREE STANDALONE* new alternative bypass method
    for db201x cid50/cid51, pnx5230 cid49/cid51, db2020 cid49/cid51.
    you DO NOT NEED logs for them anymore.
    PLEASE CHECK FAQ (http://www.mobile-files.com/forum/sh...0&postcount=47) for *important*instructions.

    - added all latest bypass packages

    Rapidshare link (http://"http://rapidshare.com/files/11617279...14033.exe.html)

    ps.
    we forced to complete "free4all",because griffin "team" boldly stoled
    our solution and made everything for free and *completely* unprotected,
    like they always do.
    They even used our executor, and changed inside everything
    to "griffin team". Well, that is exactly what i expected from any team.
    there is too much crocodiles and lake is dried

  7. #37
    ADDIER
    Guest

    re: Setool Box Updates

    *v0.914034*

    - added FREE STANDALONE new alternative bypass method
    for *db201x cid53* phones.

    please note that due lack of all needed loaders,
    "identify" for cid53 db201x phones will only work with DCU60.

    RapidShare link (RapidShare: 1-Click Webhosting)

  8. #38
    ADDIER
    Guest

    re: Setool Box Updates

    some w200 cid53 firmwares are uploaded. main and SFA-files only for now.
    filesystems will be uploaded as they appear.v

  9. #39
    ADDIER
    Guest

    re: Setool Box Updates

    uploaded w200 red53 filesystems and firmwares r4gb001 r4gh001 r4ha014 r4ja011 r4jb001
    uploaded w830 red53 filesystems and firmwares r1jc002 r1kg001

    and little gift for setool2 owners: r1f030 firmware for k660 w890 w910
    because that firmware is not released yet, i prepared language package with all language available inside.
    treat that language package as customization file.

    ps.
    if you not need specific language - delete it from language packages.

  10. #40
    ADDIER
    Guest

    re: Setool Box Updates

    uploaded r3ba030 firmware for c702. kinda exclusive
    because that firmware is not released yet, i prepared language package with all language available inside.
    treat that language package as customization file.

    ps.
    if you not need specific language - delete it from language packages

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •