Help me unlock K550

[berthstein]

When apply vkp patch put also main in the right window otherwise you get that error

[Beep88]

R8BA024 main generic LI 52 used
not flashed FS yet, as phone is dead before. (downloaded central europe and europe2 as i could not find europe1)

original was R6CA001 orange generic

Thanks for the help.

The FS and MAIN on your phone *should* be of the same version. And the patch should be created using the MAIN of that same version. Now you have R6CA001 Orange as your FS, and R8BA024 MAIN, that's not going to work.

Remember when you flash FS, you must finalize either using XS++ dropdown selection, or flash your own custpack.

[joca]

After flashing: Main + FS + Customising file system (with K610 option as there is not one for K550)
I open SeTool and select K550 + Bypass 2020 + Use quick Patch.
Place Simox made patch on Misc Files and click Write Script.
Then i got this:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35665701790621 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Boss\Desktop\SimPatch\SIMLockPatchGen\vkp \Remove_SIM_lock_K550_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:13 secs.


All following efforts were stopped due to phone starting up and being detected by Windows.
Used USB drivers but still same.

Not able to do this phone.
Help...:eek:

[LmAn`]

If you want to apply other patches later, first aplly Quick Access patch.Then unlock and others...
If you don't - click on bypass and NOT on Use "quick access" patch
When selecting phone model in SE Tool, select K610!

[miguel8935]

try the smartclip

[joca]

If you want to apply other patches later, first aplly Quick Access patch.Then unlock and others...
If you don't - click on bypass and NOT on Use "quick access" patch
When selecting phone model in SE Tool, select K610!

Will try this tomorrow, thanks.

Don't know what a smartclip is :confused:

[LmAn`]

Will try this tomorrow, thanks.
Don't know what a smartclip is :confused:

If you want go with smartclip. I thought you'll want to continue modding your phone and with .vkp patches it can be done very easy. Whatever. Good luck tommorow. :)

[jasmin]

Thread closed.