Help! Bricked my w810i

[Benyboy3]

in xs++ are you using version 3.1 or 3.2 as 3.2 is a beta version and has been known to cause damage to phones, if you are, i recommend you get xs++ 3.1 and reflash main with that, then use setool lite to write your vkp patch to the phone (you need to apply the quick acsess patch before you can write patches, but after you have done that patches will take around 40 to 50 seconds if that to complete)

How to apply the patches to DB2020 CID52 phones Using SETool2 Lite:

Step 1:
IMPORTANT: First you need backup the GDFS. If something goes wrong you can unbrick you phone with this backup. Here is how to do:
Open SETool2 Lite v1.11.
1. Select your phone model.
2. Click on Read GDFS button.
3. Follow the instructions given by SETool2 Lite.
4. You will get a gdfs_yourIMEI.bin file in SETool2 Lite folder. Put it to a safe place.


Step 2:
Note: If You Have Already Applied Quick Patch Before, Skip To Step 3.
We will apply the quick access patch to phone. It is needed to be able to use the quick access method in future. Due to this great patch you can easily apply the further patches, just like to DB2010 CID 49 phones.
!!!YOU NEED TO DO THIS ONCE AND ONLY ONCE!!!

1. Select your phone model. (se tool lite)
2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
3. Click on ... (three dots) button near MISC files box, and select the vkp file generated in step 2.
4. Tick Bypass DB2020 security checkbox.
5. Click on Add button and select the MAIN firmware file.
6. Press FLASH button.
7. Follow the instructions given by SETool2 Lite.
8. When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

At one moment you will belive that nothing happens and the status windows is not changing! DO NOT remove the CABLE! Wait until "ELAPSED x SECONDS" appears in status window.

This process will take some time, about 15-20 minutes or more...


Step 3:
Now you can apply the patches to unlock the phone:
1. Click on Clear button.
2. Select your phone model.
3. Tick Use "quick access" patch checkbox
4. Uncheck(remove the tick from) Bypass DB2020 security checkbox.
5. Click on ... (three dots) button near MISC files box, and select the vkp file.
6. Click Write SCRIPT button
7. Follow the instructions in left status window...
8. When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

Wait until "ELAPSED x SECONDS" appears in status window, and done. Your phone is patched.

Please Feel Free To Press Thanks Button If You Like The Patches.