Well I crossed a major hurdle I think. I did some researching and decided that if I was gonna mod my phone I would do so starting with XS++.
After downloading FAR I was reading that it was gonna be prompting me for information that I didnt currently know about my phone and that I would have to use XS++ or SEUS to find out. So I just went with XS++ anyhows.
Well after extracting the XS++ file program with a extractor and starting the application I attempted a connection with my phone. first try was a failure due to no usb drivers installed. second attempt gave me the following information.
22:26:33| TURN OFF PHONE!
22:26:33| Hold 'C' button on phone and connect phone NOW.
22:26:33| You have 30 seconds...
22:26:33|
22:26:40| Baseband ID: 9900
22:26:40| Protocol Version: 3.1
22:26:40| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
22:26:40| ...using GDFS name
22:26:40|
22:26:40| Profiling SEMC phone...
22:26:40| Platform: DB2020
22:26:40| OTP CID: 51
22:26:40| EROM CID: 52
22:26:40| EROM Color: Red
22:26:40| IMEI: 01127100xxxxxx
22:26:40| Phone ID: W580
22:26:40| Region: CINGULAR
22:26:40| CDA: CDA102774/102 R17A
22:26:40| Firmware Version: R7AC001
22:26:40| EROM: R3A022
22:26:40| Ready for operation!
22:27:33|
22:27:33| Sending db2020_cid01_prodid_p3j.bin...
22:27:33| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
22:27:33| This is a PRODUCTION_ID loader
22:27:33|
22:27:33| Sending db2020_mem_patcher_cid52_r2a006.bin...
22:27:34| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
22:27:34| This is a MEM_PATCHER loader
22:27:34|
22:27:34| Sending db2020_cid52red_flash_r2a005.bin...
22:27:34| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
22:27:34| This is a FLASH loader
22:27:34| Sendinging shutdown signal to phone...
22:27:34| Done.. You may now connect again...
22:27:34| Shutting down...
...... good? bad? anyone know where to go from here?
my phone turns on and works properly so I would say it was a success....
I'm interrested in doing some more modding but I need to gain some more experience with XS++ a little more aswell as code.\
/thanks
Tom
in the US




