Quote Originally Posted by mak15 View Post
Thanks for you help!
I downloaded the following files (it's not the files "yooman" suggested, because I don't have access):
K790_R1EG001_FS_AMERICA_2_RED49.fbn
K790_R1EG001_MAIN_GENERIC_RED49.mbn

Then I added them in the SEtool2Lite under Files window.
Firmware Upgrade Pack: Blank.
MISC files: Blank.
Restore file: Blank.
CDA: Blank.
Change CID to: Current.
Start Address: 44000000 Length: 00020000

Then I pressed Flash, plugged in the cell phone and let it ran.....

When it's finished, the following showed up:
----------
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3522********** CERT:N/A
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\KYPH\Desktop\Fix Phone\firmware\R1EG001\K790_R1EG001_FS_AMERICA_2_R ED49.fbn
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:4260
Will flash 213 blocks...
SSW loading returns:0
writing C:\Documents and Settings\KYPH\Desktop\Fix Phone\firmware\R1EG001\K790_R1EG001_MAIN_GENERIC_R ED49.mbn
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:9100
Will flash 455 blocks...
verify block error
last blk:44DA0000,00010000
Elapsed:281 secs.
-----------

I still cannot turned on my phone, why??? All I can tell is it can't verify the blocks. :(
With this you only reflash the firmware.But your erom is corrupted.So you have to flash the erom file.
Download the file from Downloads - EROM-FOTA_RED_CID49 - K790_RED_CID49_R3B021_EROM-FOTA_2006-10-12_08 - Top Sony Forums
if you don't have access the search it!!!!!!
Then follow the guide to flash erom file
REPAIRING EROM GUIDES for most sonyericsson phones - Top Sony Forums
It should solve your problem
Good luck!!!