Another W810i problem!

[puzzle]

Hi
I've done some reading and searching of the forums but can't find anyone with the same problem. I have unlocked my K550i ok so have done it before. When trying to unlock my W810i, I clicked read GDFS using SeTool 2 Lite and XS++. I managed to get to the part where the phone requires unplugging etc (after flash props) using SeTool. However, it then aborted all operations, said it was fatal (and it was). So tried using XS++ and that said IMEI does not match GDFS name but continued anyway and that crashed out too!
All I was trying to do is backup the GDFS (having gone to update phone first using SEUS, although no updates were available). No patches were applied, flashing of main etc. It just didn't read GDFS and is now a brick!
Any help appreciated, thanks in advance!

[mohdumer]

IMEI does not match GDFS name

This Means That Your GDFS Wasnt Original. Your Phone Was Already Flashed With Some Other Firmware. Now Since You Dont Have Backup Of Your GDFS You Need To Recreate One. I Dont Think Any Free Tools Support That But May Be SeTool Cracked Version. Search The Forums.

[ali_power42]

xs++ always gives yoy that message
setool2lite is the best
please post the full log here to help you
you may need to flash fota+main+fs+custom

[puzzle]

SeTool log file:

Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35945701192256 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
can't open file "C:\Documents and Settings\puzzle\My Documents\SeTool_2_Lite_1.11__with_video_tutorials \setool2lite_db2020\rest\R4EA031_CXC1250316_GENERI C_HN"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Abort all operations.
wrong response, break.
failed, that is fatal
Elapsed:80 secs.

XS++ log file:

18:27:43| XS++ v3.1 (Darwin) Ready !

18:27:43| Executed on Microsoft Windows XP

18:27:59|

18:27:59| Attempting to open the interface...

18:27:59|

18:27:59| TURN OFF PHONE!

18:27:59| Hold 'C' button on phone and connect phone NOW.

18:27:59| You have 30 seconds...

18:27:59|

18:28:07| Disconnected... Unplug the phone

18:28:30|

18:28:30| Attempting to open the interface...

18:28:30|

18:28:30| TURN OFF PHONE!

18:28:30| Hold 'C' button on phone and connect phone NOW.

18:28:30| You have 30 seconds...

18:28:30|

18:28:35| Baseband ID: 8040

18:28:35| Protocol Version: 3.1

18:28:35|

18:28:35| Sending db2010_cid00_prodid_p3l.bin...

18:28:35| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

18:28:35| This is a PRODUCTION_ID loader

18:28:35| Activating GDFS...

18:28:35| Cannot open GDFS

18:28:35| Activating GDFS...

18:28:35| Cannot open GDFS

18:28:35| Activating GDFS...

18:28:35| Cannot open GDFS

18:28:35| Activating GDFS...

18:28:35| Cannot open GDFS

18:28:35| Activating GDFS...

18:28:35| Cannot open GDFS

18:28:35| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)

18:28:35| ...using IMEI name

18:28:35|

18:28:35| Profiling SEMC phone...

18:28:35| Platform: DB2010

18:28:35| OTP CID: 49

18:28:35| EROM CID: 49

18:28:35| EROM Color: Red

18:28:35| IMEI: 35945701xxxxxx

18:28:35| Phone ID: W810

18:28:35| Region: n/a

18:28:35| CDA: n/a n/a

18:28:35| Firmware Version: n/a

18:28:35| EROM: n/a

18:28:35| Ready for operation!

18:28:45|

18:28:45| Sending db2010_cid49red_cs_r3a010.bin...

18:28:47| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010

18:28:47| This is a CHIPSELECT loader

18:28:47| Activating loader...

18:28:47| Activating GDFS...

18:30:55| Error: GDFS operation failed.

18:30:55| Disconnected... Unplug the phone

18:30:55| Shutting down...


Hopefully, someone can identify from the above what has happened? I am interested to know why my firmware wasn't original and appears to be already flashed when it's a new phone! Any help appreciated.

[simox]

can't open file "C:\Documents and Settings\puzzle\My Documents\SeTool_2_Lite_1.11__with_video_tutorials \setool2lite_db2020\rest\R4EA031_CXC1250316_GENERI C_HN"

The problem is that you don't have the required rest file.
So, download the attachment, unpack it and copy the rest file to setool2lite_folder\rest\ folder. Then re-flash the MAIN firmware, and start the whole process again, it will work now...

[ali_power42]

see the message cant open....
this is related to rest fils

download rest files and if not find any specific rest file you can use main firmware instead of

[ts013]

They're needed to restore the part of the firmware which gets destroyed by the breakin for CID49 phones.
They're just a very small part of the main firmware.

[rudie]

Not to hijack this thread but, can I asked what are rest files and how are they differ from other flash files?

[puzzle]

Thanks for the assistance. Phone now switches on but says "configuration error please contact your network operator or service centre". Any ideas please? I was able to backup GDFS first!
Thanks

[mescal]

Thanks for the assistance. Phone now switches on but says "configuration error please contact your network operator or service centre". Any ideas please? I was able to backup GDFS first!
Thanks

you need to customize the menu(load it up). This file should be zipped format and folder path should be "tpa\preset\custom\"..then everything will be good..that happens to me now is all good..
1) Select Phone Model
2) Select Misc File ... add the .Zip customize file.
3)flash