W810 Configuration error

[kerolah]

1.SO i start up xs++
2.click customize system file
3.then do i match my cad to CDA article: CDA102494/158 or CENT_EUROPE
4.then i put the firmware (W810_R4DB005_MAIN_GENERIC_HN_CID49) in the top box
5.flash
6.put (W810_R4DB005_MAIN_GENERIC_HN_CID49) in second box
7.flash
8.make patch
9. write script with setools
10.done

is that correct.... the only step im not sure about is step 3! thankyou


**EDIT


i tryed to do it and after i flash it just keeps doign this over and over

23:35:12| +++ Sending CS_LOADER...
23:35:12| Sending loaders\db2010_cid49red_cs_r5a.bin...
23:35:14| This is a CHIPSELECT loader
23:35:14| Activating loader...
23:35:14| Activating GDFS...
23:36:02| Checking if loader is unlocked...
23:36:02| This loader is LOCKED (errorcode=30)
23:36:02| ***** Auth startup (cmd 05-50)
23:36:02| ***** AuthA (cmd 05-42) hacking
23:36:14| Try #1000 and counting...
23:36:26| Try #2000 and counting...
23:36:38| Try #3000 and counting...
23:36:50| Try #4000 and counting...
23:36:52| ...4201
23:36:52| Matches: 0:0003954, 1:000246, 2:0001, 3:0
23:36:52| Totals : 0:0007886, 1:000511, 2:0005, 3:0
23:36:52| Theory : 0:0007876, 1:000523, 2:0002, 3:0
23:36:52| ***** Reset (cmd 01-0C)
23:36:52| Waiting for the phone to disconnect
23:36:53| Waiting for the phone to reconnect
23:36:56| Baseband ID: 8040
23:36:56| Hardware Platform: db2010 Marita compact
23:36:56| Protocol Version: 3.1
23:36:56| ***** Sending PRODUCTION_ID LOADER
23:36:56| Sending loaders\db2010_cid00_prodid_p3k.bin...
23:36:56| This is a PRODUCTION_ID loader
23:36:56| +++ Sending CS_LOADER...
23:36:56| Sending loaders\db2010_cid49red_cs_r5a.bin...
23:36:58| This is a CHIPSELECT loader
23:36:58| Activating loader...
23:36:58| Activating GDFS...
23:37:46| Checking if loader is unlocked...
23:37:46| This loader is LOCKED (errorcode=30)
23:37:46| ***** Auth startup (cmd 05-50)
23:37:46| ***** AuthA (cmd 05-42) hacking
23:37:58| Try #1000 and counting...
23:38:10| Try #2000 and counting...

*edit*