help me !!!!

[sex9413]

hi all i cant get in phone system, i just stuck here. i been wait like hour still stop here what i need to do? i got Grey sony ericsson w580i i try like many time still not going. what i did wrong?

13:47:33| XS++ v3.1 (Darwin) Ready !
13:47:33| Executed on Microsoft Windows XP
13:49:57|
13:49:57| Attempting to open the interface...
13:49:57|
13:49:57| TURN OFF PHONE!
13:49:57| Hold 'C' button on phone and connect phone NOW.
13:49:57| You have 30 seconds...
13:49:57|
13:50:03| Baseband ID: 9900
13:50:03| Protocol Version: 3.1

[ts013]

Strange...please try SE Tool lite.

[sex9413]

when i using SeTool 1.0 give this

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:1 secs.
Abort all operations.
Can't load ID loader !
Elapsed:39 secs.
ChipID:9900,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:4 secs.

what is this

[dignity786]

Check that your phone is working fine or not... if yes then try re-installing the USB drivers (broken USB drivers result into a lot of problems)

[kai_]

Have you got SEUS installed with relevant phone drivers?

[skysgone]

are you still having problems? i got the same grey w580i phone and have been successful using both XS++ and SETool 2 Lite app. perhaps the problem is with the phone drivers not being installed on your computer.

[Benyboy3]

try using the update service installed in your phone, then try xs++, does your phone turn on and function normally??
If possible try running it on another computer, and take xs++, se tool and the usb drivers with you...
let us know how you got on, good luck....

[ama95]

if you can't do anything take your phone to service

[store_17]

it should be the worst case...poorer than red light
try to go to SE service

[daynakopak]

is the flash cable driver installed?
that is diffrent by usb driver
do your phone turned on when you connected that to program(xs or setool)?
if yes the flash driver is not installed yet