Spending all day long experimenting, I made driver with unreal quality. I'm impressed of it myself :) Some useful functions also updated and added. So I proudly present new driver! Let's go:


Super Function'n'Quality ver.6.6 by StaM.
=====================================
Based on Super_modmix by Strong v1.2 beta, 5.7 by Sarmad. Superfunctions combined from Strong 5.7 and JonAugust_69 v.54.64.
optimized for K750-W800. Works with W810 also. (CID 36-CID 49)

Copy camdriver0.dat to ifs/settings/camera and restart your phone.
HOW TO USE SuperFunction:

SuperFunction is turned on with all camera modes (including VR)
Fine mode=improved Fine mode, longer exposure time, noise reduction ON.
Normal mode=good quality, quick shots, noise reduction slight.
Macro on is for macro shots only (10-40 cm to object).
Use Infinite focus (EV0.0>Zoom 1.1) for shooting object >6m far.

Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview:

-------------------------------------------------------------------------------------------------------------------
-2.0: SCENE (1.1-Portrait 1.2-Landscape 1.3-Twilight Portrait 1.4-Twilight Landscape 1.5-Sports 1.6-Beach/Snow 1.7-Document)

-1.7: BILINEAR FILTER (1.0 off, 1.1-4.0 on)

-1.3: SPOT PHOTOMETRY (1.0-off 1.1-on, useful for macro shooting)

-1.0: FOCUS MODE (1.0 macro mode, 1.1 normal mode, 1.2 full range, 1.3 Fast mode, 1.4 Fast mode and full range, 1.5 Macro mode). Default is normal.

-0.7: MANUAL SHUTTER SPEED (1.1-4.0 increase/decrease speed viewfinder preview)

-0.3: ZOOM (1x-4x)

0.0: MANUAL FOCUS (1.0-auto, 1.1-infinite, 1.2-4.0 manual, half press shutter for zoom preview)

+0.3: EV (1.1-2.0, Normal -3.5)

+0.7: MANUAL WHITE BALANCE (1.1-1.3 cold, 1.4-4.0 warm)

+1.0: CONTRAST (1.1-4.0)

+1.3: SATURATION (1.1-default, 1.2-4.0 value from b/w to strong coloured)

+1.7: COLOR EFFECT (1.1-2.5 yellow, 4.0-2.6 blue)

+2.0: COLOR EFFECT2 (1.1-2.5 green, 4.0-2.6 red)

========================================
The driver has manually exposure lock.
It is useful when takes photos indoors and some outdoors to avoid high overexprosure.
Works only in infinite mode (EV 0.0 +/- zoom 1.1). Move the camera to get the desired light, press half shot and hold it to lock exposure, then move the camera to the object and take the photo.

In good daylight outdoor shots use Normal mode (max. 1/20 exposure time).
In low Light conditions and indoor shots use Fine Mode. Flash is adviced to use.
Use manual White Balance function for better results (especially with Flash - set WB to 1.4-1.5).
Always hold the camera tightly in your hands, or use a tripod to avoid blur shots.
When using manual focus, better turn on zoom preview for easier tuning (on 1.2-4.0 values).

ISSUES: unknown.
I hope you'll enjoy using it!


StaM 6.6 SuperFunction'n'Quality.zip