General Information about Patch-Unlocking (start here if you want to unlock)

[SeaMonkey]

Profiling SEMC phone...
03:41:23| Platform: DB2020
03:41:23| OTP CID: 51
03:41:23| EROM CID: 53
03:41:23| EROM Color: Red
03:41:23| IMEI: 35238402xxxxxx
03:41:23| Phone ID: K770
03:41:23| Region: S_E_EUROPE
03:41:23| CDA: 1202-3377 R3A
03:41:23| Firmware Version: R8BC004
03:41:23| EROM: R3A022
03:41:23| Ready for operation!
03:41:39| Sorry, your phone is NOT SUPPORTED
03:41:39| Error: Cannot send flash loader
03:41:39| Error: Flashing failed
03:41:41| Disconnected... Unplug the phone

Nothing for free,because you have CID53
03:41:23| EROM CID: 53
Only with some payed service

[Marietta81]

Hi to everybody.
I have an old locked V800, DB2000, CID36.
I upgrated it with xs++ 3.1 in Z800 using below files:
Z800_R1Y005_MAIN_EU_2_VI_RED36.mbn
Z800_R1Y005_FS_EUROPE_2_RED36.fbn
After rebooting, i had the known "configuration error".
Trying to use any custpack, xs++ is going on bruteforcing and after a while it stops waiting for connection.
I've tried simlock generator but the execute button in xs++ is always inactive.
I've tried setool lite 1.1 but it doesn't support cid36.
Any other ideas to unlock the phone?
Thank you in advance.

[nshah]

Hi,
Need a help!!!!
I run this tool XS++v3.2.exe to find out Platform and CID info from my SE K800i phone. It displayed all the info as expected - Platform : DB2020 and EROM CID : 49.
After displaying the info, a pop-up dialog appeared which asked if you want to upgrade your EROM CID from 49 to 52 with "Yes" and "No" button? I clicked "yes" it said succesfully updated. Now I am not being able to start the phone when I connect the phone with XS++v3.2.exe it just says :

Did not receive 0x5a. Continuing
18:23:09| Sorry, your phone is NOT SUPPORTED
18:23:09| Sendinging shutdown signal to phone...
18:23:09| Binary acknowledge failed with: 15

I think screwed up. Please help!

[SeaMonkey]

First of all don't use 3.2 version(it's beta and not stabile) - use 3.1 Darwin instead,remove battery,put it back but now try to connect with Setool2lite and post log here without IMEI number

[nshah]

I found two versions XS++ v3[1].2 and XS++ v31. Which one do you think I should use?

[nshah]

Hi Seamonkey
with XS++ 3.1 now i can see my phone configuration info (see below) but still phone didn't start up. Though at one point I saw white screen als called "white screen of death" for a while. Please advise what should I do now. Thanks for your help!
10:57:22| You have 30 seconds...
10:57:22|
10:57:28| Baseband ID: 9900
10:57:28| Protocol Version: 3.1
10:57:28| Phone name detected!
10:57:28|
10:57:28| Profiling SEMC phone...
10:57:28| Platform: DB2020
10:57:28| OTP CID: 49
10:57:28| EROM CID: 52
10:57:28| EROM Color: Red
10:57:28| IMEI: XXXXXXxxxxxx
10:57:28| Phone ID: K800
10:57:28| Region: ORANGE_GEN
10:57:28| CDA: CDA102511/47 R17A
10:57:28| Firmware Version: R1CB001
10:57:28| EROM: R3A011
10:57:28| Ready for operation!

And here is the log generated by SE-Tool Lite
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517080XXXXXXX CERT:RED
FLASH CID:52 COLOR:RED

Model:K800i
Brand:Orange
MAPP CXC article: R1CB001 prgCXC1250212_ORANGE_WI
MAPP CXC version: R1CB001
Language Package:ORANGE_GEN
CDA article: CDA102511/47
CDA version: R17A
Default article: cxc1250490
Default version: R1CB001

Network LOCKED
Operator: 234-33

Elapsed:25 secs.

[SeaMonkey]

You must do full flash with Orange branded firmware or you can debrand phone with Generic firmware( need 3 files - MAIN,FS and CUSTPACK)

[nshah]

I found the following generic firmwares, will it help?
K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn
K800_R8BA024_FS_CENT_EUROPE_RED52.fbn

[simox]

Yes, those firmwares are good for your phone. Also you must upload a CENT_EUROPE custom pack.
One question: what language(s) do you need?

[nshah]

Thanks man! Do u know any link where i can download this custom pack.
I need english.