Results 1 to 9 of 9

Threaded View

  1. #6
    Plus 10
    Join Date
    Oct 2007
    Device
    W580i
    Posts
    106
    Thanks
    1
    Thanked 5 Times in 5 Posts
    Quote Originally Posted by onlyone View Post
    stop it.. no need to worry just yet
    then download setool
    make a bake-up of your gdfs first of all
    then use setool to flash main...

    backing up gdfs is a little bit tricky, meaning that in the middle of the opperation you will need to remove batery and insert it back and then press ok and you will be asked to reinsert the cable holding c

    I just stoped it and it informed me that flasing failed. First let me say I never flash any sony phone before so I really hope I can revive this phone. I have setool and will follow your instructions.

    Thanks!

    Quote Originally Posted by onlyone View Post
    stop it.. no need to worry just yet
    then download setool
    make a bake-up of your gdfs first of all
    then use setool to flash main...

    backing up gdfs is a little bit tricky, meaning that in the middle of the opperation you will need to remove batery and insert it back and then press ok and you will be asked to reinsert the cable holding c
    I just tried your method and got the following. What am I doing wrong?


    Welcome to SEtool2 ( LITE edition ) v 1.10
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit Index of ./ and buy FULL.

    Will backup GDFS now.
    ChipID:8040,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35235xxxxxx CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
    Flash ID check:2019
    Flash props sent ok
    verify block error
    last blk:44140000,00010000
    prepare failed,that is FATAL
    Elapsed:55 secs.

    Ok, I was able to back up the GDFS after couple of tries. Now I am trying to flash the main (R4EA031) but I am getting this error in the log: SFA block not accepted. (32/10884),error:01FF. Here is what I have done. I extract the zipped file and add it to Firmware upgrade pack in Setool and following the instruction. Also, do I have to continue holding the C button when the phone is detected. Please guys I really need your help with this.


    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:2019
    Flash props sent ok
    FOUND: R4EA031_CXC1250504_CINGULAR_HN
    Restore from:R4EA031_CXC1250504_CINGULAR_HN
    CSloader version:
    SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
    loader startup: executed
    loader GDFS startup: executed
    stated number of vars:1292
    Found:1109 variables
    Found:155 variables
    Found:28 variables
    GDFS read all done, GDFS_35235xxxxx.BIN written
    Phone detached
    Elapsed:74 secs.
    ChipID:8040,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35235xxxxxx CERT:RED
    PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
    LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
    Flash ID check:2019
    Flash props sent ok

    DETACH CABLE FROM PHONE.
    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:2019
    Flash props sent ok
    FOUND: R4EA031_CXC1250504_CINGULAR_HN
    Restore from:R4EA031_CXC1250504_CINGULAR_HN
    CSloader version:
    SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
    loader startup: executed
    loader filesystem startup: executed
    loader GDFS startup: executed
    Flashing upgrade archive:C:\Documents and Settings\Roy.DIMENSION\Desktop\Sony Ericsson\Cingular W810i\Main Cingular\W810_R4EA031_MAIN_CINGULAR_RED49.mbn
    CURRENT FLASH FILE CID:49
    File archive consist of 10885 blocks.
    SFA block not accepted. (32/10884),error:01FF
    Elapsed:60 secs.


    Sorry for the double post. My head is really not straigt right now.
    Last edited by rudie; 02-11-2008 at 12:51 AM. Reason: Automerged Doublepost

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •