Patches For All DB2020 CID52 Phones

[mohdumer]

; 115f348: 10270000 204E0000, 20 sec
; 115f348: 10270000 30750000; 30 sec
; 115f348: 10270000 C8AF0000; 45 sec
; 115f348: 10270000 60EA0000; 60 sec
; 115f348: 10270000 C0D40100; 2 min
; 115f348: 10270000 20BF0200; 3 min
; 115f348: 10270000 FFFFFFFF; No limits

You Need To Selsct Only One Option. When An SMS Arrives, Sound Will Play Up To That Length.:)

[mumum_08]

; 115f348: 10270000 204E0000, 20 sec
; 115f348: 10270000 30750000; 30 sec
; 115f348: 10270000 C8AF0000; 45 sec
; 115f348: 10270000 60EA0000; 60 sec
; 115f348: 10270000 C0D40100; 2 min
; 115f348: 10270000 20BF0200; 3 min
; 115f348: 10270000 FFFFFFFF; No limits

You Need To Selsct Only One Option. When An SMS Arrives, Sound Will Play Up To That Length.:)

thanks :) but where could i select that option? where in my phone? in my profiles or what? thanks :)

[LmAn`]

thanks :) but where could i select that option? where in my phone? in my profiles or what? thanks :)

Delete one of the ";" in the patch. The one with the length you want. If you are not satisfied, remove the patch, change the ";" with other line and apply again.

Example: If you want 30 seconds - the line

;115f348: 10270000 30750000; 30 sec

will become

115f348: 10270000 30750000; 30 sec

[dieselboy2]

I'm new to the patching thing here and was just wondering if there is a way to remove the patches if you don't like them? In terms of the whole thing? Or do you basically have to go through and put in ";" and modify the .vkp file and then re-flash the file back onto your phone again?

[mattsw810i]

I'm new to the patching thing here and was just wondering if there is a way to remove the patches if you don't like them?

most of them yes. The VKP should have the original code (to verify what it is replacing) and the replacement code. Wen you install them it will ask if you want to install or remove the patch (if its a patch with both new and old code)

But if worst comes to worst just flash the MAIN firmware and it back to new.

GDFS patches are a little different --- dont mess with those until you know EXACTLY whats going on...

[LmAn`]

I'm new to the patching thing here and was just wondering if there is a way to remove the patches if you don't like them? In terms of the whole thing? Or do you basically have to go through and put in ";" and modify the .vkp file and then re-flash the file back onto your phone again?

You do NOT have to modify .vkp
Removing with SETool: Click YES when you are asked "Press YES to remove, NO to apply"
Removing with JD Flasher: Everithing like applying, just check the Remove patch box before Yeah, Flash it