V630i Unlocking with total multiserver

[noomski]

Cool, thanks:

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Can't load ID loader !
Elapsed:6 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101044317 CERT:N/A
FLASH CID:52 COLOR:RED

Model:V630i
MAPP CXC article: R1JC002 prgCXC1250556_VODAFONE_MW
MAPP CXC version: R1JC002
Language Package:VFE_LIVE_2
CDA article: CDA102514/2
CDA version: R5A
Default article: cxc1250557
Default version: R1JC002

Network LOCKED
Operator: 234-15

Elapsed:3 secs.

[ts013]

Ok.
Download this file: Downloads - R1JC002_RED52 - V630_R1JC002_MAIN_VODAFONE_MW_RED52 - Top Sony Forums
Extract it and create a patch with simox patch generator. Patch the phone with SE Tool lite afterwards (follow simox tutorial!).

If you want to update your firmware you can also download the R1JC002 firmware.
If you do so, you'll have to upload the FS and a Custpack after you unlocked it (the MAIN already get's overwritten during the patching procedure).
You'll need VFE_2 FS and this custpack.

You'll have to gain access to the download area before you can start.

[noomski]

Ok, I followed the tutorial here down to part I,7 where it says:

7. Follow the instructions given by SETool2 Lite.
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

However the instructions on screen say:

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
Open COM port OK
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101044317 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

RESTARTING PHONE,IF PHONE NOT RESTARTS,THEN
REMOVE BATTERY FROM PHONE AND INSERT IT BACK

Open COM port OK

The phone does not restart - even with the battery reinserted. In fact it will not turn on at all anymore :(

What's gone wrong :( :(

Ok,

I've been reading around this subject for a while now and as far as I can gather it's supposed to be impossible to brick using setool. Is this correct? I only ask because I can't seem to get setool to recognize my phone at all anymore. I've tried to use my gdfs bin backup and ..........nothing. The phone won't switch on at all either. A friend of mine has the same phone so I've used it to recharge the battery to full and still nothing..

Can I restore my phone or has it completely died?

[ts013]

They phone can't switch on since the MAIN is destroyed by the alternative bypass.
So you can't even identify the phone at the moment?

If not, you should try this:
Remove the battery
Press identify
Hold down 2+5 on your phone
Plug the USB Cable in
Insert the battery

Does it get recognized now?

[noomski]

Unfortunateley no:

Can't load ID loader !
Abort all operations.
Elapsed:163 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Can't load ID loader !
Elapsed:7 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Can't load ID loader !
Elapsed:8 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Can't load ID loader !
Elapsed:6 secs.

nothing at all - I guess it's dead then?

[ts013]

I just realized that you were using the COM port all the time. You should use USB for DB2020 phones, it's faster and safer.
Another thing: You set the speed to 921600, the cable only supports 115200.

It really looks like your phone is bricked now...
You can try to use the USB cable but I don't think it'll work out.

I'm sorry for not realizing that earlier...

[noomski]

ok thanks :(

[vlax]

Whats the difference he used COM port instead of the USB cable'

[ts013]

Using the com interface takes much more (more than double) time for the alternative bypass.
It should also work, but he used the wrong speed.

[bannana597]

i bricked my sony ericcson v630i also.it wouldnt even turn on.i used the usb cable but wen applying the quick access patch i got a blue screen on the computer.i used the xs++ watever to reflash the firmware and it was repaired.i am now trying the same procedure on a different pc.what should i set the speed to for the usb cable that came with the fone?
thanks
bannana:)