S500i Communication error

[pennichael]

I have just flashed my s500i using Hongkong FS and MAIN Fireware, but after the phone boots, it comes up with a communication error. Can anyone put me in the right direction please?????

Here is my log.


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745239 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Users\Michael\Desktop\Sony Ericsson DB2020 Unlock Program\S500_R8BE001_MAIN_HONG_KONG_LY_RED52\S500_ R8BE001_MAIN_HONG_KONG_LY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Users\Michael\Desktop\Sony Ericsson DB2020 Unlock Program\S500_R8BE001_FS_HONG_KONG_RED52\S500_R8BE0 01_FS_HONG_KONG_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:3780
Will flash 189 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Michael\Desktop\Sony Ericsson DB2020 Unlock Program\setool2lite_db2020\qamaker\quick_access_S5 00_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:1230 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745239 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Users\Michael\Desktop\Sony Ericsson DB2020 Unlock Program\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\R emove_SIM_lock_S500_R8BE001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:17 secs.

[GinnCorvus]

You are wrong the procedure and forget the Custom Pack for finalization.
First add MAIN and FS file then CP file in MISC leaving it in zip format. Press FLASH.
After load only vkp unlock patch in MISC select "Bypass db2020 security" and press FLASH.
The quick access vkp is only for using the option "use quick access patch" in setool.
Read here: Flash your phone and How to apply or remove patch using SETool 2 Lite

[marn]

You Dont add Custome pack So take it and put it in miscfile then click on flash.
Custom PAck must same by fs information and language you need.