Help Unlocking K750i CB2010 CID 36

[draytonred]

I have a K750i CB2010 CID 36 locked to the Orange UK network, and wish to be able to use it on O2 instead. I've tried using a .vkp patch generated by SimLockPatchGen with GFlash, but it didn't work.

I'm not sure if I'm using the correct main firmware, I made the .vkp patch with K750_R1CA021_MAIN_EU_1_CL_RED36, but looking on my phone it states EU_3, which I can't find the firmware for.

Any help would be appreciated!

[seunlock]

what software are you using?
you can not use setool2 lite for that phone but you can use gflash.
the main firmware is right if you have the same firmware flashed into phone.

[Shitblast]

What he means is that firmware and FS-ware need to match. Take a look in the Topsony download-section, and you'll understand.

[berthstein]

First of all, read the info of your mobile with any software like xs++, kkclient, seking, after that you need the same firmware with the same CID or if you prefer debrand, choose to download any firmware you want with the same cid (not OTP CID).
For example:

Hold 'C' or '@' (some PDA) key and plug DCU60 USB cable.
Phone Connected...
Detected: DB2020 Series
Phone IMEI: 35xxxxxx-xxxxxx-x
Color: Red ; OTP CID: 49
EROM CID: 49
Phone Model: K800i
Operator: EUROPE_2
CDA: CDA102511/49 R6A
Phone Firmware: R1ED001

This is what I get with kkclient, EROM CID in this case is 49, so firmware as to be CID 49 and version R1ED001.

Anyway for K750i CID36 I advise you to use free unlocking software such as setool or semc8.4 (but you need a service cable like 4in1 cruser cable)

[rovtar]

use sim generator

and then setools2

works for me..

[ts014]

to patch a cid:36 use must use gflash or far & sepf, of corse the patch isn't going to work if you generate it with a different main to the one your using, flash the phone or find the correct main.