unlock Z310i

[sl.sharm]

i hab SE z310i en trying to unlock with SHU box but when i press unlock button but it says not supported yet but it is wel present in the phone list of setool software., can somebody knows some solution to unlock it.:confused:

[gsm420]

I think it can help you :


How to PERMANENT unlock from network DB3150/DB2020/DB2012/DB2001/PNX5230 phone ?

A:
first, download latest version, >= v0.91380096/UNI will do job just fine.

select USB as interface. that is REQUIRED.
select phone model
settings - check PNLY "use server for csca unlock/flash", "do full unlock instead of usercode reset", fill your login details.

back to semc tab, press unlock, attach phone with pressed "C" buttons.

if you have enough credits - you will receive next message
"SIGNATURE QUEUED FOR CALCULATION, CHECK BACK LATER"

(that means signature is added to calculation queue. calculation can take up to 3 days.
if after 3 days (72 hours) signature will NOT be calculated - credits will be automatically returned
when you press "info" or add another phone to queue.)

(if you receive next message "QUEUE FULL, CHECK BACK LATER",
that means all slots for calculations filled up and you need try again later)


Code:
It seems obvious that many amongst us do not understand plain English,
or the phrase "QUEUE FULL, CHECK BACK LATER".

Lets start with a 'QUEUE' - a long line of people one after another, all
standing in line waiting to do something in this case add a phone to the
server to start the process of unlocking. 'FULL', obviously means the
maximum, no more, 100% or chockerblock (sorry English phrase).

Add both these words to together you get 'QUEUE FULL' and we get a long
line of people waiting or 'queuing' with no people allowed to join this queue
unmtil the first person in line leaves the queue. Are we getting there yet....
(retards simply nod your head at this point )

Now "CHECK BACK LATER", means "try again soon", "try in a few
minutes", "try in an hour", "try in the middle of the dark dark night when its
very scary", you get my point now surely.

So there you have it for those "people" who don't quite understand
what "QUEUE FULL, CHECK BACK LATER" really means......
call it an idiot's guide.now - leave that phone aside for some time and check back periodically
(NOT each 5 min , but each 60 min )

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive
"%YOUR_IMEI% ALREADY IN QUEUE" - that means signature is in calculation queue.

if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

next, backup will be created so you will be able to restore phone if something will go wrong
(hardly believe, but who knows...)

next, you will be prompted to detach phone and turn it on.
do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
connect phone to usb.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all needed phone drivers (phones.rar on support area)
be SURE that you install all drivers correctly.
press "testpoint ok"

note: in latest setool2 version phone will be searched constantly on all
available comports until it will be found. So, you not need to press "TESTPOINT OK"

procedure will continue,phone will be switched off and unlocked.

remember, if something will go wrong - you have a backup of security units.

cost of DB2020 unlock is 10 credits. it divided into 2 steps:
signature calculation 6 credits (charged once), phone unlock - 4 credits
(charged once, if by accident, server is recharging while you executing unlock, credits NOT charged)

as usual, credits will NOT be recovered in case of connection failures. (error 10054,10060).
that is NOT terms for discussion.

NOTE! there is STILL REMAIN USERCODE RESET FOR DB2020/DB2012/PNX5230.

it will work, if you UNCHECK option "do full unlock instead of usercode reset" and press UNLOCK.

note: i STRONGLY recommend you to instal PHONE drivers BEFORE starting unlock procedure