still white screen k610i....please help

[crossroads]

i just flashed the k610i last in Setool2 litev1.11 with this firmwares
K610_R1JG001_MAIN_GENERIC_RED52.mbn
K610_R1JG001_FS_CENT_EUROPE_RED52.fbn
successfully flash and if try to test it, the start up logo and the please wait appears but in the mids of please wait suddenly will turn into white screen..
i also flashed the unit in cruiser and setool box3 but all same result....what would be the best sulotion fir this kind of problem?....need help

[ts013]

It seems like your GDFS is bricked.
Flash the GDFS backup of your phone, if you have one. Do not flash any other GDFS, it'll kill your phone for good.
You can try to take out the battery for about 2weeks, it may work then.
I had an V630 (which is the same hardware as K610) with the same problem and it was working again after two weeks without battery. But don't flash it again then, it'll be bricked again.

[moz13]

i have a v630i 2 of them one has a white screen i tried updating whith seus and it only gets to 97 percent every time then gives up and i were gonna try and flash it if this will work at all can i just flash the main or will i have 2 flash it all just wanted advise on the extent it will need doing 2 fix dont wanna flash it if i dont have 2 thanks

[marn]

i just flashed the k610i last in Setool2 litev1.11 with this firmwares
K610_R1JG001_MAIN_GENERIC_RED52.mbn
K610_R1JG001_FS_CENT_EUROPE_RED52.fbn
successfully flash and if try to test it, the start up logo and the please wait appears but in the mids of please wait suddenly will turn into white screen..
i also flashed the unit in cruiser and setool box3 but all same result....what would be the best sulotion fir this kind of problem?....need help

Mr jasmin say true.gdfs is damage.use backup gdfs.if youn dont have it you can use box3 and write new gdfs for your phone.

[crossroads]

Where can i get NEW gdfs for these phone? isnt it so risky to write new gdfs?

[ts013]

marn: Mr. Jasmin....:rolleyes:
You can't write a different GDFS on DB2020 phones without having a backup of the security units, not even with SE Tool 3 box.

crossroads: Do you have a SE Tool 3 box? There's a small chance to revive it if you have SET3box but well...it's not big...

[crossroads]

yes i have SETOOL 3box and i already flash with that box but same result...
i qoute myself

i also flashed the unit in cruiser and setool box3 but all same result....what would be the best sulotion fir this kind of problem?....need help

what are the procedures for SETOOL3BOX to revive these phone?