help with flashing/fixing w880i

[wallberg]

processing part 1 2 works and then 3 i should remove the phone and press "c" and connect it again (in my case "2") the program cant find the phone its just says disconnect the phone and take out battery and put it in and press C.

it worked now flashing in xs++ but the phone wont start anyway :P



i think its working now it was just some crap with it, but should i use simlockpatch to remove sim card lock now ?
use it on W880_R1JC002_MAIN_GENERIC_AI_RED52.mbn and then reflash it ?
i know its alot of stupid questions but im a newbie :P

ok i used simlockpatch and got a small patch i opened setoolitev1.11 and flashed it with original flash and the patch in misc field.

now i cant get the phone to charge :P or start hehe, im just making it worse

i've got it to start now but it still says "put in the right sim card"

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Anton\Skrivbord\ANTON\ericsson\setool2lit eV1.11\qamaker\quick_access_W880_R1JC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
New block #0002 added: $45CC0000
Blocks selected OK. Reading blocks: 3
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:82 secs.

when i apply the patch with setoolite