K790i flashed to K800i

[nnaeem11]

You Find A Lot That A K790 Can Be Converted To K818 But Please DONT TRY Cause It Will Damage Your GDFS And Again You Wont Get Signals. The Most You Can Do Is Customize Your K790.

i have flash that mobile i think 20 times with different flash files of K790i from the first error but it never taken back the signals what should i do how i customize


where will be the first GDFS backup of my phone ??


sorry to ask this little questions but first time i made mistake at any of the SE phone


NAEEM FAROOQUI.

[Ratata82]

Copy pasted from SETool forum...

Just follow this procedure carefully...
-----------------------------------
Case:
Let's say you have a DB2020 phone with some GDFS issue, say you wrote K800 firmware to a K790 and now you have "no network".

Solution:You'll have to rewrite the original GDFS. Sadly, most users never back it up before proceeding with whatever operation they intended to do in the first place. This is done through the "Read GDFS" button in SETool, btw . it will produce a .bin-file named with the phones IMEI and can be found in your SETool basedir. Take good care of it.

Now, lets say you didn't back up the phones GDFS and did something to screw it up. Then you have a problem, because rewriting it with another phones GDFS will screw the security units and the phone will be bricked. Generally a bad thing, right ?.

Luckily, there is a way to solve this and the procedure is as follows:


Use only COM/UFS interfaces!

1 (Optional): Back up the corrupt GDFS (yes, even though it's corrupted, so you have a full backup just in case). Again: "Read GDFS". Move it to a safe place on your HD, this is to avoid accidentally deleting it and for avoiding confusion with all the other txt-files that will appear later on.
2: Create a scriptfile (a normal txt-file will do) with the following contents:
Code:
gdfsread:00020e5a
gdfsread:00020e48
gdfsread:00010851
gdfsread:00000006
gdfsread:0000000E
gdfsread:00000013
gdfsread:0000001C
gdfsread:00000018
gdfsread:000000AA
Now save it. Name it "readsecunits.txt" or whatever. Select the file in SETool's MISC-field and press "Write SCRIPT".

All the read units will be stored in a single file named by the phone's IMEI.
rename it as "secunitsbackup.txt" to avoid confusion

3: Apply the GDFS from a working DB2020 phone.
- Read it out from the source phone (it will be stored in the SETool basedir named by the source phone's IMEI)

- Check "Format GDFS" in "Settings" and write it to the damaged phone by selecting it in the MISC-field and pressing "Write GDFS".
if you have CID52 phone, NOT CHECK "format GDFS"

Do NOT turn the phone on afterwards.

4: Now, you'll have to write back the original units. Apply the "secunitsbackup.txt" you created by selecting it in the MISC-field and pressing "Write SCRIPT".

Voila, it should have done the trick.
I'll ask the_laser to produce some DB2020 GDFS files in case you don't have a working phone to read from.


another method of quick recovery (without all mess with gdfs backup/write/etc)

create and execute following script
gdfswrite:000000ACXX

set XX to valid for your phone:

;00 MS_GSM900
;01 MS_EGSM900
;02 MS_DCS1800
;03 MS_PCS1900
;04 MS_GSM900_DCS1800
;05 MS_EGSM900_DCS1800
;06 MS_GSM900_PCS1900
;07 MS_EGSM900_PCS1900
;08 MS_DCS1800_PCS1900
;09 MS_GSM900_DCS1800_PCS1900
;0a MS_EGSM900_DCS1800_PCS1900
;0b MS_GSM850
;0c MS_GSM850_PCS1900
;0d MS_EGSM900_GSM850
;0e MS_DCS1800_GSM850
;0f MS_EGSM900_DCS1800_GSM850
;10 MS_EGSM900_GSM850_PCS1900
;11 MS_DCS1800_GSM850_PCS1900
;12 MS_EGSM900_DCS1800_GSM850_PCS1900