Results 1 to 5 of 5
  1. #1
    Recently Initiate
    Join Date
    Jan 2008
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Dead k790 any help is greatly appreciated..

    Hi,

    this guy tried to unlock my phone without my approval (long story short) and most likely pulled the plug during a flash or just a bad flash...

    The phone does not power up. no red led or nothing...and when plugged into a computer with a dc60 you can still hear the usb click sound.

    I've searched the forum and other forum as well and came to the conclusion of a eprom

    Is this a problem with the eprom??

    the phone is with the guy, and it'll take maybe a month while waiting for his buddy to come back and fix it. I have their temp phone as a replacement.
    I don't want to wait that long..

    So if this is only a problem with the eprom or another...any solutions that can help me fix it??


    any help is greatly appreciated..
    Thanks.

  2. #2
    Top Platinum jasmin's Avatar
    Join Date
    Sep 2007
    Device
    K800i
    Posts
    2,590
    Thanks
    54
    Thanked 1,513 Times in 731 Posts
    Look connect it to xs++ 3.1 or setool lite and copy here your phone`s log.

    Here is, how to repair your erom:

    REPAIRING EROM GUIDES for most sonyericsson phones

    Nice day

  3. #3
    Recently Initiate don_x1's Avatar
    Join Date
    Nov 2006
    Device
    K800
    Posts
    15
    Thanks
    10
    Thanked 0 Times in 0 Posts
    Did you remode the batt first before you tried to reflash the phone?

  4. #4
    Recently Initiate
    Join Date
    Dec 2007
    Device
    -
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Somewhere I have heard you could recover it by SEUS. I do not know if it is true, but the person I spoke with told me that is is possible.

    He told me that SonyEricsson tells you, when you use SEUS that the battery must be completely charged. Normally it will update your phone without a problem. But also your computer can fail, and then also is the datastream to your phone broken up. Then he told me that you can recover, by using SEUS again.

    I know, flashing was probably not been done by SEUS, but with DaVinci or something like that. But, you can always try using SEUS.

    Good luck! ;)

  5. #5
    Member
    Join Date
    Aug 2007
    Device
    -
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    actually, i have the same problem that just occured yesterday except i was just using my phone normally when it happened! I didn't flash it , but I was just talkin normally with my friend until it turned off. I tried turning it on after, and i get a white screen and it freezes at the sony logo afterwards. now, my phone doesn't turn on at all, even after i "tried charging" it (the charging screen doesn't even show anymore. But when you say the red led light, is it the light on the bottom right side of the phone? because mine flashes when i try to turn it on by pressing the power button, but the phone just doesnt turn on at all.

    i'm a noobie to these phone flashin and stuff, anyone else know what the problem is?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •