K750 to W800

[ama95]

I have a problem. Just flashed K750 to W800. After flashing with XS++ 1.5 I turn on my phone and "Please Wait" message is on screen. Then it freezes. What to do?

[DomagojX]

Flash im again,
1. flash main
2. flash fs
3. flash custom

thats it and it must work

[ama95]

Not working

[DomagojX]

XS++ 3.1 Guide-Flashing,Customizing,Recovering - Top Sony Forums

follow this tutorial and it should work

[Zallman1]

Flash im again,
1. flash main
2. flash fs
3. flash custom

Have you done this?

[ama95]

I followed the tutorial but when flashing XS++ says Finishing flash and it freezes

[ts013]

Please post your identify log and try to flash with another XS++ version and/or SE Tool lite.

[DomagojX]

yes
1. when flashing fs with xs at the end will freeze, wait 30 sec (that is normal by flashing k750 to w800),just unplug the phone and go to step 2 than 3

[Semen_Alex]

HI i have a problem..........I just flashed my K750 to W800 firmware using XS++ , W800_R1BC002_MAIN_EU_EMEA_RED49.bin and W800_R1BC002_FS_EU3.fbn.
When i start my phone i get a error like this -> "Configuration error. Please contact your network operator or service center." PLS help me...pls. :-((

[Zallman1]

HI i have a problem..........I just flashed my K750 to W800 firmware using XS++ , W800_R1BC002_MAIN_EU_EMEA_RED49.bin and W800_R1BC002_FS_EU3.fbn.
When i start my phone i get a error like this -> "Configuration error. Please contact your network operator or service center." PLS help me...pls. :-((

What about custom? You are not finished when you flash main and fs ;)