Results 1 to 10 of 189

Hybrid View

  1. #1
    Recently Initiate
    Join Date
    Jan 2009
    Device
    -
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Flash your phone and How to apply or remove patch using SETool 2 Lite

    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    CID52 BYPASS PROCEDURE STARTED
    Processing part1...
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    Processing part2...
    Processing part3....
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    REMOVE CABLE FROM PHONE
    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    HOLD "C" BUTTON AND ATTACH PHONE

    CID52 BYPASS PROCEDURE FINISHED

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Trying to launch embedded bootloader...
    INT LDRB2020_PRELOADER_FOR_SETOOL2
    LDRB2020 LOADER FOR SETOOL2
    Flash ID check:897E
    Flash props sent ok
    writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:9200
    Will flash 460 blocks...
    SSW loading returns:0
    writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_FS_AMERICA_2_RED52.fbn
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:4180
    Will flash 209 blocks...
    SSW loading returns:0
    Going to execute VKP script....
    Starting to process VKP patch script: C:\Documents and Settings\clerk\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W580_R8BE001_GENERIC .vkp
    VKP script loaded OK. Lines: 6
    Patch structure created OK. Determining blocks to read...
    New block #0000 added: $44600000
    Blocks selected OK. Reading blocks: 1
    Blocks readed to memory OK. Checking contents...
    Blocks patched OK. Start writing...
    Block 0 written
    VKP script executed OK
    Elapsed:778 secs.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED

    Model:W580i
    Brand:Sony Ericsson
    MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
    MAPP CXC version: R8BE001
    Language Package:AMERICA_2
    CDA article: CDA102568/14
    CDA version: R4A
    Default article: cxc1123364
    Default version: R8BE001

    Network LOCKED
    Operator: MULTIPLE

    Elapsed:10 secs.

    can anyone explain to me what am i doing wrong my phone is still locked.

    1 love and god bless

  2. #2
    Gold SeaMonkey's Avatar
    Join Date
    May 2008
    Device
    DEVIL's SE
    Posts
    1,509
    Thanks
    26
    Thanked 311 Times in 247 Posts

    Re: Flash your phone and How to apply or remove patch using SETool 2 Lite

    Try without .fbn (FS) - MAIN+.vkp and did you apply Quick Access patch or just read this, but for DB2020 phones Remove SIM-lock patch generator - Top Sony Forums

  3. #3
    Top Team Gold riders4sia's Avatar
    Join Date
    Jul 2008
    Device
    K750i - K810i - XPERIA arc - XPERIA tipo dual - Xperia Z Ultra
    Posts
    2,314
    Thanks
    21
    Thanked 282 Times in 271 Posts

    Re: Flash your phone and How to apply or remove patch using SETool 2 Lite

    Quote Originally Posted by casper663 View Post
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    CID52 BYPASS PROCEDURE STARTED
    Processing part1...
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    Processing part2...
    Processing part3....
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok

    REMOVE CABLE FROM PHONE
    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS "READY"

    HOLD "C" BUTTON AND ATTACH PHONE

    CID52 BYPASS PROCEDURE FINISHED

    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Trying to launch embedded bootloader...
    INT LDRB2020_PRELOADER_FOR_SETOOL2
    LDRB2020 LOADER FOR SETOOL2
    Flash ID check:897E
    Flash props sent ok
    writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:9200
    Will flash 460 blocks...
    SSW loading returns:0
    writing C:\Documents and Settings\clerk\Desktop\Sony Ericsson\W580_R8BE001_FS_AMERICA_2_RED52.fbn
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:4180
    Will flash 209 blocks...
    SSW loading returns:0
    Going to execute VKP script....
    Starting to process VKP patch script: C:\Documents and Settings\clerk\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W580_R8BE001_GENERIC .vkp
    VKP script loaded OK. Lines: 6
    Patch structure created OK. Determining blocks to read...
    New block #0000 added: $44600000
    Blocks selected OK. Reading blocks: 1
    Blocks readed to memory OK. Checking contents...
    Blocks patched OK. Start writing...
    Block 0 written
    VKP script executed OK
    Elapsed:778 secs.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
    FLASH CID:52 COLOR:RED

    Model:W580i
    Brand:Sony Ericsson
    MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
    MAPP CXC version: R8BE001
    Language Package:AMERICA_2
    CDA article: CDA102568/14
    CDA version: R4A
    Default article: cxc1123364
    Default version: R8BE001

    Network LOCKED
    Operator: MULTIPLE

    Elapsed:10 secs.

    can anyone explain to me what am i doing wrong my phone is still locked.

    1 love and god bless
    you need to apply quick access patch first in order to unlock, go to setool folder/qamaker/ there you will find qamaker.exe. dray your .mbn file over the qamaker.exe, a patch will be created in the qamaker folder. now start setool2lite, select phone model, tick the bypass db2020 security, choose only the .mbn file and within the misc... select the qa patch that qamaker.exe just created. and flash it. after finishing, reinsert your phone battery, select phone model again, now tick the use "quick access" patch and under the misc... select the simlock patch, now click the write script, when the process is finished, your phone will surely be unlock. have a nice day

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •