Flash your phone and How to apply or remove patch using SETool 2 Lite

[jasmin]

It`s the same procedure like by applying patchs , only difference is When a dialog pop-up, click "Yes" to remove the patch.

Nice day

[wlyya]

Began to understand a bit

[m00005]

I just remove simlock on my w580

[ric20007]

IS this program easy to control or use?

[jasmin]

Yes.

Nice day

[airfoil]

Flash your phone using SETool 2 Lite

Step 1: Shut down your phone and open SETool 2 Lite.
Step 2: Choose your phone model.
Step 3: Press the ADD button and select the Main&FS files (.mbn & .fbn). MAIN and FS can also be bin files. In fact the only important thing is that, they're unencrypted.
Step 4: Select the archive with the customization files (.zip).After it is recognized by the program , in the left side will appear informations about the customization.The archive(.zip) contain files from tpa/preset/custom.
Step 5: Press the FLASH button.
Step 6: Connect the usb cable while holding down the "c" button un your phone. Then wait for the process to finish.
Step 7: Disconnect your phone , get the battery out for 5 seconds , reintroduce it and start up the phone.It will appear a screen with "Please Wait...", wait 1-2 minutes and then the phone will start normally.

Sorry if this too much of a n00bish question, but does the 'C' button have to be pressed continously (in Step 6 above) until the flashing process is complete?

[darac_os]

Sorry if this too much of a n00bish question, but does the 'C' button have to be pressed continously (in Step 6 above) until the flashing process is complete?

NO it doesnt have!

[kkx1223]

can it change the language of the phone

[cutiepie]

anybody know how to add chinese input to my w580i? or at least be able to read chinese

[oner]

anybody know how to add chinese input to my w580i? or at least be able to read chinese

Flash your Firmware. You can download it at firmware download section. Choose one with chinese language